i have a 1972 rx3 with 13b big streetport 48 ida soon to be 51mm any how i going to install my 2 6a msd's on i have two accel coils the super stocks Ive been using on stock ignition with a first gen rx7 distributor can i use my msd's with those coils or should i buy the msd blaster 2 coils and for plugs i got NGK Iridium IX Spark Plugs i got
BKR8EIX and BKR9EIX would those be good with the setup I'm running with the car its been sitting for like 3 years i turn the motor once a month buy hand i always dump a little AFT in the motor to be safe I'm going to get it going this summer what cheap ngk's plugs can i use to get it going just in till its running right i wont use the iridiums till its burn all that AFT out and my msds are on any help will be appreciated thanks.

 

those coils should be fine with 6A's.

 

hey thanks wacky what cheap ngk's plugs can i use to get it going just in till its running right till its burn all that AFT out and my msds are on thanks again

 

use FC, they are free at pick up part

 

true true i think i will do that thanks. like i said i have 2 msd's 6a's i guess ill use the accel coils how should i wire up the two msd's since i have them or should i use one but i dont have any other car to use the other 6a box or f@#$ it just use both.

 

PM me with your #. I can help you get it going.

 

ok cool

 

with just 1 6al and two accel coils my 1stgen had tons of spark.

 

if pick a part is too far for you to go, mazdatrix recommends using autolites for a short while. they are really cheap even though not the best quality. i thought msd's didnt like iridium or platinum type plugs? i heard the regular ngks were the best w/ msd. well, maybe i was just hearing stuff...