1974 13b-re Nova
Yup. Lots of little stuff. Sorry, been lazy about posting. Almost done with the electrical pre-wire. The pannel welds to the inside of the firewall, under the dash. Made it removeable, so any additions or corrections can be done outside of the car. I hate wiring under the dash.
Finished reinforcing the TII clutch fork....https://www.rx7club.com/showthread.p...26#post8504726
Based on our visit, I also made the flange for the crankcase vent-to-catch can.
Finished the plug wires.
Also made the mount and plumbing for the wastegate solenoid. I'm still waiting on some earls seperators/clamps to tidy the hoses up a bit.
Finished reinforcing the TII clutch fork....https://www.rx7club.com/showthread.p...26#post8504726
Based on our visit, I also made the flange for the crankcase vent-to-catch can.
Finished the plug wires.
Also made the mount and plumbing for the wastegate solenoid. I'm still waiting on some earls seperators/clamps to tidy the hoses up a bit.
Thread Starter
Joined: Jan 2008
Posts: 438
Likes: 5
From: Ft Worth, Tx
The three distribution blocks are power (top), ignition(middle), and ground(bottom). Just makes things a little more organized and serviceable in my opinion. Also makes adding more circuits later on much easier.
Thread Starter
Joined: Jan 2008
Posts: 438
Likes: 5
From: Ft Worth, Tx
Just got back from the body shop. I made the 8 hour round trip, to weld in the battery mount and the electrical pannel mount. Things are coming along slowly, but it is looking great. He's almost ready to spray the undercarriage and jam the car. Looks like another month or two.
yeah ill just enjoy my smog and gun control free land of stupidity and intolerance
Joined: Dec 2006
Posts: 1,763
Likes: 0
From: bayamon pr, orlando fl, paterson nj
Joined: May 2001
Posts: 2,390
Likes: 2
From: San Francisco, CA
god this thread is going down hill...
that nova is damn nice and im glad your paying so much attention to everything. if it where me though, it would have a nice twin turbo boinger in it, even though my heart is for the rotory. either way keep at it. cant wait to see pics of the body once its out the shop.
that nova is damn nice and im glad your paying so much attention to everything. if it where me though, it would have a nice twin turbo boinger in it, even though my heart is for the rotory. either way keep at it. cant wait to see pics of the body once its out the shop.
look you can try to be eloquent here but no one will notice. your just another jack off on the internet just like the rest of us. so get off your high horse and at least talk **** like a man. subtle nuances may be cool in frisco but in man country they just make you look like a homo.
Joined: May 2001
Posts: 2,390
Likes: 2
From: San Francisco, CA
To the OP,
Sorry for the distraction, it just annoys me when closet homo's bag on peoples projects for no other reason than the fact that their brain capacity is too limited to understand why someone would do something different than themselves. I give you props for doing such a project, especially one that invites stupid people who try to knock-it.
You noticed, but then again you are right, you are a noone.
Again you're right, but some more so than others...as in your case.
Apparently there is no one more qualified to make that statement than you.
You seem to have a theme developing, is Brokeback Mountain your favorite fishing spot?
Sorry for the distraction, it just annoys me when closet homo's bag on peoples projects for no other reason than the fact that their brain capacity is too limited to understand why someone would do something different than themselves. I give you props for doing such a project, especially one that invites stupid people who try to knock-it.
You noticed, but then again you are right, you are a noone.
Again you're right, but some more so than others...as in your case.
You seem to have a theme developing, is Brokeback Mountain your favorite fishing spot?
To the OP,
Sorry for the distraction, it just annoys me when closet homo's bag on peoples projects for no other reason than the fact that their brain capacity is too limited to understand why someone would do something different than themselves. I give you props for doing such a project, especially one that invites stupid people who try to knock-it.
You noticed, but then again you are right, you are a noone.
Again you're right, but some more so than others...as in your case.
Apparently there is no one more qualified to make that statement than you.
You seem to have a theme developing, is Brokeback Mountain your favorite fishing spot?
Sorry for the distraction, it just annoys me when closet homo's bag on peoples projects for no other reason than the fact that their brain capacity is too limited to understand why someone would do something different than themselves. I give you props for doing such a project, especially one that invites stupid people who try to knock-it.
You noticed, but then again you are right, you are a noone.
Again you're right, but some more so than others...as in your case.
Apparently there is no one more qualified to make that statement than you.
You seem to have a theme developing, is Brokeback Mountain your favorite fishing spot?
oh the irony of you insinuating im gay when you live in the city of faggotry.
and once again ill put this out here. we dont live far from each other. lets meet up at sac raceway and settle this with a $500 contest of speed. you win you get to take my ignorant inbred money. i win i get to laugh at you while i go spend your money on alcohol, tobacco and firearms. deal? dont puss out now cause that seems to be a pervasive theme amongst the west coast rotary guys
Thread Starter
Joined: Jan 2008
Posts: 438
Likes: 5
From: Ft Worth, Tx
Haven't been working on the car much lately. Been out of town on business quite a bit lately and the evenings when I have been home have been spent welding oil field stuff at the fab shop. But......I managed to sneak in the new oil cooler mount. The old one would have worked fine, but I think this one looks nicer. Hopefully this weekend I'll run up to Lockney and put the subframe and rear suspension on the car. It all depends if Andy has the underneath painted and everything jammed.



just to let you know nova im still great fan of the swap...hell im a fan of any swap... man i love this thread
wait, wut
