New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

will not start

Old 05-17-09, 01:42 PM
  #1  
Can Post Only in New Member Section
Thread Starter
 
cbm12's Avatar
 
Join Date: May 2009
Location: portland
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
will not start

I am looking to buy a 84 rx7. It ran befor it sat all winter. some one told the owner that if we pulled the plugs and dumpped a "little" in each plug hole it would fix the compretion problem. it this true?
Old 05-17-09, 01:44 PM
  #2  
Can Post Only in New Member Section
Thread Starter
 
cbm12's Avatar
 
Join Date: May 2009
Location: portland
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
forgot

this is an addendum to my last post. I acctualy need to know befor thursday the 23. thats when I am supposed to pick it up. so if any one out there has any ideas I would appriciate the input.
Old 05-18-09, 04:49 AM
  #3  
Rotary Freak

iTrader: (7)
 
Go48's Avatar
 
Join Date: Feb 2005
Location: Mont Alto, PA
Posts: 1,608
Likes: 0
Received 2 Likes on 2 Posts
That would be worth a try. Put an ounce or so of light oil in each rotor housing via the plug holes. Fully charge the battery (important). Depending on how long the car actually sat without running, the fuel may need replacement. A few months is OK, but if it REALLY sat for a year or longer, replace the fuel.
Old 05-18-09, 09:18 AM
  #4  
Lives on the Forum

 
Kentetsu's Avatar
 
Join Date: Jun 2004
Location: Grand Rapids Michigan
Posts: 11,359
Received 14 Likes on 11 Posts
Seafoam works better than oil, or just about anything else that I've found. Dump an ounce or two down the carb, or into the spark plug holes if its fuel injected. She should start right up, but will produce a cloud of white smoke until the Seafoam burns off. Cleans the motor out really nicely too. Dump the remainder of the can into the gas tank and take it for a spin...



.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM


Thread Tools
Search this Thread
Quick Reply: will not start



All times are GMT -5. The time now is 06:14 PM.