New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

What to expect from owning an FC

Thread Tools
 
Search this Thread
 
Old 11-04-08, 04:09 AM
  #1  
Newbie
Thread Starter
 
booyasamy's Avatar
 
Join Date: Nov 2008
Location: Portland, OR
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Question What to expect from owning an FC

I'm interested in buying an FC but I'd like to do my research before jumping in. What should I expect as an owner when it comes to maintenance, reliability, tuning, upgrading, etc. I've read all the faqs on here but I want to get as much advice as I can so I'd post here.

I do have one specific question. Which FC version is recommended for a first time owner? Will I run into more trouble with a turbo than an NA?

Also, I apparently have to make 5 posts before I can post in the classifieds section...

-Sam
Old 11-04-08, 08:04 PM
  #2  
Administrator

iTrader: (8)
 
mar3's Avatar
 
Join Date: Nov 1998
Location: So. Arlington, TX!!!
Posts: 12,974
Likes: 0
Received 59 Likes on 36 Posts
Any turbo car is likely to have more problems than its naturally aspirated cousin...let's see what the 2ndgen gurus have got to say...

Mario III
Old 11-04-08, 09:33 PM
  #3  
Rotary Freak

iTrader: (1)
 
socalrotor's Avatar
 
Join Date: Mar 2003
Location: southbay
Posts: 2,839
Likes: 0
Received 0 Likes on 0 Posts
headaches.........buy a good condition fc, and dont mod ANYTHING until you read for a few weeks if you do buy one.
Old 11-05-08, 07:31 AM
  #4  
NASA-MW ST4

iTrader: (7)
 
farberio's Avatar
 
Join Date: Dec 2004
Location: Norcal, Bay Area
Posts: 3,800
Likes: 0
Received 3 Likes on 3 Posts
Normally an n/a is recommended for the first time owner of a sports car, a tad more reliable. If you have driven sports cars and fixed them up a bit then you can opt for the turbo as you will have a better idea of what your looking t.

Normal maintenance of a 20 year old car applies here, super duper extra special.

Tuning/Moding - There is still a good community out there both cheap crap and expensive nice, but some things are getting rarer and rarer.
Old 11-05-08, 09:14 AM
  #5  
Rotary Freak

 
hanman's Avatar
 
Join Date: May 2001
Location: Peoria, IL
Posts: 1,779
Likes: 0
Received 0 Likes on 0 Posts
Well, you should expect to have to put some money in it. Any of the second gen cars are at least seventeen years old now, so like any car of that age, they will require some maintenance. With that said, the second gen is a pretty reliable car. They tend to have some electrical issues, but those are well documented on this and other forums.
The N/A is probably a little less trouble than the turbo, but the second gen turbo is still a very reliable car.
Old 11-05-08, 12:47 PM
  #6  
Zoom Zoom Baby

iTrader: (1)
 
Zanity's Avatar
 
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes on 0 Posts
i can't speak from experience as i too am on the hunt for my first rx7 (fc also) but from what i hear reliability is superior in the n/a models compared to the turbo models. but like i said, i don't know from experience so i'm not sure how much of a difference there is between the two as far reliability.
Old 11-05-08, 03:45 PM
  #7  
Rotary Freak

iTrader: (7)
 
Go48's Avatar
 
Join Date: Feb 2005
Location: Mont Alto, PA
Posts: 1,608
Likes: 0
Received 3 Likes on 3 Posts
IMO: The best series is the FC that you find in excellent condition, low mileage, good compression on all faces of all rotors, etc. Get my drift? If you are lucky, it will be the newer S5 series. If not, an S4 is just fine. Go with NA so that reliability problems will be least likely to bite you. Learn all about the unique aspects of the car, learn to drive it effectively--maybe do a little HPDE--and eventually, you may want to go with a TII for a little more HP/torque.
Old 11-05-08, 06:46 PM
  #8  
F yo couch!

iTrader: (6)
 
helghast7's Avatar
 
Join Date: Feb 2007
Location: Belleville, NJ
Posts: 2,321
Likes: 0
Received 0 Likes on 0 Posts
beginers best bet especially if you want to soley work on it yourself would be an n/a s4.....everything is easy...sensors are simple and easy to locate...the omp is mechanical, 5/6 ports are mechanical.....its the easiest F/I rotor you could possibly have....because of that it makes diag, and repairs nice and easy
Old 11-07-08, 12:36 AM
  #9  
Newbie
Thread Starter
 
booyasamy's Avatar
 
Join Date: Nov 2008
Location: Portland, OR
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the replies, this is exactly the kind of advice I needed. Am I right to expect to pay between $2000 and $3500 for a N/A FC?
Old 11-07-08, 12:21 PM
  #10  
Zoom Zoom Baby

iTrader: (1)
 
Zanity's Avatar
 
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes on 0 Posts
in decent cinditions they tend to run around there.
the s5 (90,91) sometimes will be higher.
Old 11-07-08, 02:44 PM
  #11  
Junior Member
 
GIXX's Avatar
 
Join Date: Jul 2007
Location: Washington DC
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
If you want to learn from my mistakes, just make sure that you don't buy your fc from someone who messed it up trying to modify it to be a drag car, even if you get it for $500.00
Old 11-09-08, 01:13 AM
  #12  
Junior Member
iTrader: (1)
 
country7runner's Avatar
 
Join Date: Oct 2007
Location: Indiana
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
i agree with gixx. thats the same thing that happened to me (sort of) and after almost two years i am still fixing all his mistakes.
Old 11-09-08, 04:52 AM
  #13  
Junior Member

 
redlinedrift's Avatar
 
Join Date: Dec 2005
Location: Tokyo
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
i've had multiple rx7's over the last 5 years and they always leave a huge smile on your face. light and agile and don't need a ton of hp to be very fast. they have a bad reputation because most people up the boost on an angine that runs at higher temps then a normal motor to begin with and it just gets hotter which can cause problems. hp is easy to build but u can't do it cheap and you need to really focus on cooling. you can order kits to replace all the vacume lines with silicone hoses fairly cheap and that is something that i would suggest. the biggest thing is to find a clean car with not much or anything done to it under the hood which can still be found but usually runs about 15K
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cooldude
West RX-7 Forum
5
10-03-15 09:17 PM
diggzzy
Introduce yourself
2
09-07-15 08:18 PM
apooch
Single Turbo RX-7's
8
09-04-15 10:27 AM



Quick Reply: What to expect from owning an FC



All times are GMT -5. The time now is 02:07 PM.