New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

umm... help?

Thread Tools
 
Search this Thread
 
Old Nov 16, 2012 | 05:27 AM
  #1  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
umm... help?

What does it mean if my door ajar light is blinking? 88 vert
Reply
Old Nov 16, 2012 | 10:34 AM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Either your door is not fully closed or the switch is not working properly.
Reply
Old Nov 16, 2012 | 02:08 PM
  #3  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
Originally Posted by misterstyx69
Either your door is not fully closed or the switch is not working properly.
Switch is fine. I can hear a hiss from behind the logicon every time it goes on and off. (Blinks about the same speed as the turn signals as a reference
Reply
Old Nov 16, 2012 | 06:14 PM
  #4  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Do you have your overhead light (the one by the rearview mirror) set up such that when the door is open that the light turns on, and if so, does that light flicker as well? If it's geared up to turn on w/the door open and the light does not flicker then you might have a cold solder joint at the idiot lights unit. The connector FI-01, which mates the Front harness w/the Instrument harness, might be faulty and not a solid connection as well.
Reply
Old Nov 16, 2012 | 11:09 PM
  #5  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
All the interior lights are inop since this started. this started just after I removed the cruise control switch. Tried just pluging it back in and nothing changed
Reply
Old Nov 16, 2012 | 11:22 PM
  #6  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
And the purpose for removing the cruise switch was?
Reply
Old Nov 17, 2012 | 12:04 AM
  #7  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Did you check the Room fuse as it powers the interior courtesy lights? And when you say "interior lights" are you referring to just the courtesy lights or other lights like the dash lights?
Reply
Old Nov 17, 2012 | 07:22 AM
  #8  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
Originally Posted by satch
And the purpose for removing the cruise switch was?
The mounting holes for it are broken so it Falls inside the dash. Cruise didn't work and I don't use cruise anyway
Reply
Old Nov 17, 2012 | 07:25 AM
  #9  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
Originally Posted by satch
Did you check the Room fuse as it powers the interior courtesy lights? And when you say "interior lights" are you referring to just the courtesy lights or other lights like the dash lights?
Dome lights and the door lights. I'll check that fuse tho. I did hear a snap like a fuse blowing wile taking the ignition switch off...
Reply
Old Nov 17, 2012 | 09:30 AM
  #10  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
So, besides removing the Cruise Switch you also removed the Ignition Switch? Anything else?
Reply
Old Nov 21, 2012 | 11:52 AM
  #11  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
Problem has been fixed. Thanks for the help everyone
Reply
Old Nov 21, 2012 | 01:44 PM
  #12  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Originally Posted by Drifted88
Problem has been fixed. Thanks for the help everyone
And how did you fix your problem? Chances are you will not be the only person who has these problems so when something is fixed it is also important to share w/the community how the problem was made to be a thing of the past.
Reply
Old Nov 21, 2012 | 04:54 PM
  #13  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
Originally Posted by satch

And how did you fix your problem? Chances are you will not be the only person who has these problems so when something is fixed it is also important to share w/the community how the problem was made to be a thing of the past.
10 amp fuse that protects the interior courtesy lights blew. I think one of wires on the ignition switch shorted on the steering collum durring removal.
Reply
Old Nov 21, 2012 | 10:39 PM
  #14  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Originally Posted by Drifted88
10 amp fuse that protects the interior courtesy lights blew. I think one of wires on the ignition switch shorted on the steering collum durring removal.
Rule#1:NEVER work on wiring with the battery connected..EVER..
Rule#2: is don't check gas tank level with a Match!
Reply
Old Nov 21, 2012 | 10:47 PM
  #15  
NathanFD's Avatar
Junior Member
 
Joined: Nov 2012
Posts: 14
Likes: 0
From: DFW, TX
Make sure to check the ground on the switch as well. a bad ground is usually the cause for intermitent issues.
Reply
Old Nov 22, 2012 | 10:53 AM
  #16  
Drifted88's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Oct 2012
Posts: 95
Likes: 0
From: Pennsylvania
Originally Posted by NathanFD
Make sure to check the ground on the switch as well. a bad ground is usually the cause for intermitent issues.
Do you know a link to the wiring diagrams and Parts locator?
Reply
Old Nov 22, 2012 | 12:13 PM
  #17  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Originally Posted by Drifted88
Do you know a link to the wiring diagrams and Parts locator?
Foxed.ca - Mazda RX-7 Manuals
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FDcoscos
2nd Generation Specific (1986-1992)
14
Feb 25, 2014 02:42 PM
dwb87
2nd Generation Specific (1986-1992)
4
Oct 4, 2006 05:52 PM
$100T2
1st Generation Specific (1979-1985)
2
Sep 1, 2005 08:35 PM
sixstar
1st Generation Specific (1979-1985)
12
Dec 1, 2004 02:45 PM




All times are GMT -5. The time now is 06:02 PM.