Scrapping my 12A need help with a swap
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Kelowna BC/ Fort McMurray AB
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Scrapping my 12A need help with a swap
I want to swap in a 13b
I can handle hooking it up to the transmission but what do I have to know to make the electrics convertible
With the intake and everything else
If you could help me with some links
Or just tell me what sort of questions I need to be asking Google
I have no clue so at this point anything will help
I can handle hooking it up to the transmission but what do I have to know to make the electrics convertible
With the intake and everything else
If you could help me with some links
Or just tell me what sort of questions I need to be asking Google
I have no clue so at this point anything will help
#3
Moderator
iTrader: (3)
welcome to the board.
- mounting bracket (RB, GSL-SE or custom)
- front cover* (GSL-SE)
- oil pan (GSL-SE)
- you will then need to get the exhaust sorted in a way of your choosing
- intake/fuel (you will have to decide if you want EFI or carburetor)
EFI will require some knowledge of wiring and circuits, but should be worth the effort. on the other hand a carburetor can provide comfort, if that's your thing. it's no longer a matter of cost, so it's going to come down to what you or the person building the car is comfortable with.
* means it's not absolutely necessary, but a good idea. the 12A and 13B have different contours for the front of the oil pan.
- mounting bracket (RB, GSL-SE or custom)
- front cover* (GSL-SE)
- oil pan (GSL-SE)
- you will then need to get the exhaust sorted in a way of your choosing
- intake/fuel (you will have to decide if you want EFI or carburetor)
EFI will require some knowledge of wiring and circuits, but should be worth the effort. on the other hand a carburetor can provide comfort, if that's your thing. it's no longer a matter of cost, so it's going to come down to what you or the person building the car is comfortable with.
* means it's not absolutely necessary, but a good idea. the 12A and 13B have different contours for the front of the oil pan.
#4
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Kelowna BC/ Fort McMurray AB
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I'm not looking for crazy power i just want to get the car running and on the road
Although I might have trouble now
Not 20 minutes after I posted my original question I got a layoff notice at work so who knows what I can afford untill im employed again
#5
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Kelowna BC/ Fort McMurray AB
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
welcome to the board.
- mounting bracket (RB, GSL-SE or custom)
- front cover* (GSL-SE)
- oil pan (GSL-SE)
- you will then need to get the exhaust sorted in a way of your choosing
- intake/fuel (you will have to decide if you want EFI or carburetor)
EFI will require some knowledge of wiring and circuits, but should be worth the effort. on the other hand a carburetor can provide comfort, if that's your thing. it's no longer a matter of cost, so it's going to come down to what you or the person building the car is comfortable with.
* means it's not absolutely necessary, but a good idea. the 12A and 13B have different contours for the front of the oil pan.
- mounting bracket (RB, GSL-SE or custom)
- front cover* (GSL-SE)
- oil pan (GSL-SE)
- you will then need to get the exhaust sorted in a way of your choosing
- intake/fuel (you will have to decide if you want EFI or carburetor)
EFI will require some knowledge of wiring and circuits, but should be worth the effort. on the other hand a carburetor can provide comfort, if that's your thing. it's no longer a matter of cost, so it's going to come down to what you or the person building the car is comfortable with.
* means it's not absolutely necessary, but a good idea. the 12A and 13B have different contours for the front of the oil pan.
I was talking to a guy at work
He said not to mix and match
If I get a new engine I should replace the wiring harness and the cpu with one that would Usually accompany the new engine
Is he right? Anything you can add or elaborate on ?
#6
Moderator
iTrader: (3)
Well I'm definitely interested in learning.
I was talking to a guy at work
He said not to mix and match
If I get a new engine I should replace the wiring harness and the cpu with one that would Usually accompany the new engine
Is he right? Anything you can add or elaborate on ?
I was talking to a guy at work
He said not to mix and match
If I get a new engine I should replace the wiring harness and the cpu with one that would Usually accompany the new engine
Is he right? Anything you can add or elaborate on ?
does this mean you would want EFI now? if so, then you can go about it by either wiring in a Gen II Rx-7 ECU and harness or go with something aftermarket. at this point in time, i'm tempted to say aftermarket is easier and better, but i suppose it's arguable. that is, of course, my opinion. also, i am deliberately not even mentioning the ECU from the GSL-SE because i view that to be a monumental waste of time unless one is restoring an actual GSL-SE, which you clearly are not.
Thread
Thread Starter
Forum
Replies
Last Post
Johnny_Cracker
Suspension/Wheels/Tires/Brakes
26
10-16-15 11:05 AM