Hello boys and girls of the rotary world, my Alternator belt needs to be replaced and im shy tools. I was curious if anyone can give me the sizes of the wrenches I will need to preform this task and get my N/A 88 Fc running.

All feedback is appreciated,
Than You All.

 

14MM and 12MM. Plus a small 8MM or 10MM for the main power lead. You'll also need a length of wood (broom handle, hockey stick, etc.) to pry up on the alternator against the top of the engine to tension the belt.

You can find belt replacement procedures in the Haynes manual and FSM.