Replace Alt Belt
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Location: Sioux Falls, SD
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Replace Alt Belt
Hello boys and girls of the rotary world, my Alternator belt needs to be replaced and im shy tools. I was curious if anyone can give me the sizes of the wrenches I will need to preform this task and get my N/A 88 Fc running.
All feedback is appreciated,
Than You All.
All feedback is appreciated,
Than You All.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
14MM and 12MM. Plus a small 8MM or 10MM for the main power lead. You'll also need a length of wood (broom handle, hockey stick, etc.) to pry up on the alternator against the top of the engine to tension the belt.
You can find belt replacement procedures in the Haynes manual and FSM.
You can find belt replacement procedures in the Haynes manual and FSM.
Thread
Thread Starter
Forum
Replies
Last Post