had a question about using a toggle switch and push button...i have a 91 rx7 and install the toggle and push button...i put most of the wires to the toggle but it seems that im burning up the fuel pump...does anyone kno what wire they are so i can put them on a seperate toggle switch...or any better way to make it work properly..thanx

 

does anyone kno how to install a toggle and push button starter on a 91 rx7???

 

Search for the FSM and use that to find the wiring diagrams.

 

Did you ever figure out your problem?

 

s2000 push stART buttons are dooope

 

no...there r 2 wires that i dont kno what they r for...but lookin at the key switch ignition..it looks like they become hot together...so when i installed them to the toggle..it melted the wire....so then i connected them together seperately and then the car wouldnt start...i put the key switch back on and nutn...changed out the fuel pump and it fired up....and i burned up 2 feul pumps now...cuz its wrong...i need to kno the proper way to hook it up....????

 

what is fsm??

 

having problems keepin the car started...i got fuel up to the fuel filter...i took off the the inlet side of the secondary injectors...and i couldnt blow thru...took off the return and could blow thru...something abt a pulsating damper...dont kno nutn abt...

 

Maybe try using full words, the half *** typing makes me not want to attempt to read it.... Just a hint as it might help you get more help.

 

Factory Service manual

 

whats the min. amount of oil pressure should u have running thru a turbocharger....and is 45 psi too much. im running that pressure now and getting oil out the back of the turbo?

 

How exactly did you measure the oil pressure? 45 psi sounds too high.

 

I had a push button starter on my old car, the easiest way to do it is:
1. Go to pepboys or your local parts store and buy a horn button.
2. Run a 12 guage wire with an inline fuse from the battery to one terminal of the horn button.
3. Run a 12 guage wire from the other side of the terminal to the terminal on the starter solenoid.
4. put key in "on" position and push the button, be careful because this also bypasses your clutch safety switch.
Ill write a diy on it with pictures when I do this to my car.