New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

oil presure gauge problem

Thread Tools
 
Search this Thread
 
Old Nov 27, 2011 | 08:08 PM
  #1  
Rx7Robbie's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 11
Likes: 0
From: Johnstown,pa
oil presure gauge problem

My oil gauge keeps jumping from all the way to the bottom at first then stuck all the way past 110 . car runs fine with no problems. Its an s5 non turbo. I have no idea what it could be any help is appreciated.
Reply
Old Nov 28, 2011 | 03:52 PM
  #2  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
Check the connector on the oil pressure sender. It's the mushroom shaped thing underneath the oil filter on the rear iron. The wire slides onto it. If the wire is bouncing around, it will read 0 when not touching anything, but max out whenever it touches metal.
Reply
Old Nov 29, 2011 | 06:59 PM
  #3  
Rx7Robbie's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 11
Likes: 0
From: Johnstown,pa
thank you that helped alot.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snoopy FD
Build Threads
25
Dec 8, 2015 01:45 PM
andyvideopro
General Rotary Tech Support
3
Aug 20, 2015 10:55 AM




All times are GMT -5. The time now is 09:05 PM.