No Secondary Boost
#1
Junior Member
Thread Starter
No Secondary Boost
After replacing all solenoids, lines tanks testing all actuators and replacing all check valves i am still loosing boost at transition, logged it in datalogit all seems to operating correctly on the tcn and ccn. I have double and triple checked everything and i am starting to suspect PFC is playing up. Any ideas??
#2
Rotary Spirit
I had same issue. Secondary won’t kick in after 4K rpm. Found out the signal wire from ecu to secondary injectors were disconnect somewhere. I ran new wire and the secondary is back!
Thread
Thread Starter
Forum
Replies
Last Post
GOTBANNED?
3rd Generation Specific (1993-2002)
3
07-28-05 11:05 AM
farnumen
3rd Generation Specific (1993-2002)
7
07-30-04 08:54 AM