Bluenutz

as soon as check engine light comes on car looses acceleration. It will only accelerate at barely a push of the pedal, but when floored it wants to stall and hesitate. Could this be the fuel pressure regulator? I don't get a code for the pump and it has a new fuel filter. When idling runs fine.

Icemark

Check engine light coming on is putting the car in limp mode. Pull the codes to see what the problem is.

Bluenutz

26, 27, 33...omp system and port air solenoid. any way to correct this?

Jeff5808

iTrader: (7)

What year rx7 do you have?

Bluenutz

1990 GXL--manu. date 09/89

trochoid

iTrader: (6)

Hope you're sitting down, a new MOP for the S5s is over 1300 bucks, find a working used one. When the e-mop fails, the ecu goes into limp mode as Icemark stated.

If you don't have a copy of the FSM, download one from one of these sites.

http://www.wankel.net/~krwright/cars/rx7/manuals.html

http://foxed.ca/foxed/index.php?page=rx7manual

Bluenutz

does this mean my ecu is bad also? I can still reset it.

RotaryRocket88

iTrader: (7)

No, the ecu just responds to the bad OMP and puts the engine into limp mode.

dgeesaman

iTrader: (7)

While this was on an FD, I have seen an ECU burn up the position sensor of an OMP. So if you have a spare ECU I'd change it just to be safe.

Dave