New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

need help..my car would not start up..

Thread Tools
 
Search this Thread
 
Old Oct 12, 2008 | 10:04 PM
  #1  
nology05's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 5
Likes: 0
From: fresno
need help..my car would not start up..

hi i have a 93 rx7 and it would not start.. the car cranks but would not ignight ... I have check the spark plugs and ground wire and there all good ...do you guys have any ideas ..any help would be greatly be appreciated.
Reply
Old Oct 12, 2008 | 10:27 PM
  #2  
Rx7_Nut13B's Avatar
Red Neck Tony Stark - C2
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,828
Likes: 1
From: Houston Tx
DE-FLOOD if the plugs where wet, Hold gas down all the way with spark plugs out then turn engine over for 10-15secs. Reinstall plugs, put small amount of trans fluid in the spark plug holes to help get compression back up after flooding.

If that doesn't fire off after all that check the Compression of the motor.
Reply
Old Oct 14, 2008 | 12:08 PM
  #3  
nology05's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 5
Likes: 0
From: fresno
thanks bro...... im try it ...ill let you know if it dosnt work




Originally Posted by Rx7_Nut13B
DE-FLOOD if the plugs where wet, Hold gas down all the way with spark plugs out then turn engine over for 10-15secs. Reinstall plugs, put small amount of trans fluid in the spark plug holes to help get compression back up after flooding.

If that doesn't fire off after all that check the Compression of the motor.
Reply
Old Oct 16, 2008 | 08:46 PM
  #4  
nology05's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 5
Likes: 0
From: fresno
I just did the spark plug thingy ...and it still dosnt start.... I forgot to mentioned that after i have remove my battery and remove the air pump...that when it didnt want to start any more... but i have put everything back on ..... can it be my alarm or the air pump causing it not to start ...any help would be greatly appreciated ....

Last edited by nology05; Oct 16, 2008 at 08:49 PM.
Reply
Old Oct 16, 2008 | 09:32 PM
  #5  
jyz77's Avatar
Newbie
 
Joined: Oct 2008
Posts: 1
Likes: 0
From: houston
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM




All times are GMT -5. The time now is 02:11 PM.