Need advice
#1
Junior Member
Thread Starter
Join Date: May 2012
Location: Under the Bridge
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Need advice
Hello
I have a 92 fd3s.
So long story short car won't start but will crank
I replaced the fuel pump with a walbro 400lph, because I wasn't getting any fuel to the engine. Only to find out it wasn't priming when the key was in.
So I bypassed all that and then I was getting fuel but still no-go.
Later find out that there's no spark.
I was thinking it was the crank angle sensor. Although I'm not 100% sure.
I've contacted many people in the Kitchener area and everyone said that they only do engine work and no trouble shootjng anymore.
So right now I'm at a standstill. I don't know what to do. Does anyone know where I can get it fixed. My wife wanted me to bring it to the dealership, but I'm very much against that, seeing how it's modified.
Can anyone give me advice as to where I should go, or a shop that I can take it to
I have a 92 fd3s.
So long story short car won't start but will crank
I replaced the fuel pump with a walbro 400lph, because I wasn't getting any fuel to the engine. Only to find out it wasn't priming when the key was in.
So I bypassed all that and then I was getting fuel but still no-go.
Later find out that there's no spark.
I was thinking it was the crank angle sensor. Although I'm not 100% sure.
I've contacted many people in the Kitchener area and everyone said that they only do engine work and no trouble shootjng anymore.
So right now I'm at a standstill. I don't know what to do. Does anyone know where I can get it fixed. My wife wanted me to bring it to the dealership, but I'm very much against that, seeing how it's modified.
Can anyone give me advice as to where I should go, or a shop that I can take it to
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
KING.
Go to the CDN section,and look up at the top,you will see CDN shops.
I am not sure if RotaryDynamics(JIM K) will work on your car as they do rebuilds..I know MAZDEE's will.
there is another Guy.Not sure though,he's a busy guy lately..(hint: 20b thread in CDN section)..maybe PM him.
Go to the CDN section,and look up at the top,you will see CDN shops.
I am not sure if RotaryDynamics(JIM K) will work on your car as they do rebuilds..I know MAZDEE's will.
there is another Guy.Not sure though,he's a busy guy lately..(hint: 20b thread in CDN section)..maybe PM him.
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM