Selrahc_5

So, i purchased the Corksport SS braided oil cooler lines, but i cannot manage to get the upper line banjo fitting to match the top of the cooler. Maybe im routing it wrong? Anyone else have this issue? Could someone post a picture of how the lines are originally run? Im 99% sure ive got it right, but ive been trying for an hour with no luck...
Thanks in Advance!

misterstyx69

iTrader: (142)

Have you tried taking the cooler off the mount to put the line on first?..Then mount the cooler back up and snug up the lines?

Selrahc_5

I removed the 4 bolts, but not the entire cooler. It doesn't seem like there is enough of a bend at the end. Maybe I'll try to completely remove the cooler

misterstyx69

iTrader: (142)

I remember doing the braided lines and having to actually drop the cooler down to put the top line on.
That is why I am suggesting that.
The lines just don't have the benadability(new word!) to snake in the old stock spot,so they need some encouragement.

Selrahc_5

Alright then, guess ill try that! Thanks!

misterstyx69

iTrader: (142)

Let me know how you do.(try not to snap those 10mm nuts off the studs.)