FC Stalls when Clutch Pressed In
Thread Starter
Newbie
Joined: Nov 2012
Posts: 2
Likes: 0
From: BC Canada
FC Stalls when Clutch Pressed In
Hello all,
Past few days I've been noticing my FC RPM idle drop when I have the clutch pressed in and is close to stalling but now it actually does stall
Idle is totally fine in neutral and have no problems shifting.
This is the first time I've driven in in around 15 degrees Fahrenheit weather, I don't know if that has to do with anything.
Past few days I've been noticing my FC RPM idle drop when I have the clutch pressed in and is close to stalling but now it actually does stall
Idle is totally fine in neutral and have no problems shifting.
This is the first time I've driven in in around 15 degrees Fahrenheit weather, I don't know if that has to do with anything.
Welcome to the board. 
Here are a few ideas
1. Jack the car up and see if all four wheels spin freely
2. Check for vacuum leaks
3. Check the BAC (You can get a copy of the FSM at Foxed.ca)
4. Check the timing
Here are a few ideas
1. Jack the car up and see if all four wheels spin freely
2. Check for vacuum leaks
3. Check the BAC (You can get a copy of the FSM at Foxed.ca)
4. Check the timing
Thread
Thread Starter
Forum
Replies
Last Post
Zezxy
New Member RX-7 Technical
2
Sep 23, 2017 06:42 AM
red rex
2nd Generation Specific (1986-1992)
4
Dec 8, 2008 11:46 AM
black_88
2nd Generation Specific (1986-1992)
9
Jun 9, 2007 08:31 PM
dhahlen
3rd Generation Specific (1993-2002)
9
Jun 8, 2004 04:21 PM
RotaryMan88
2nd Generation Specific (1986-1992)
2
Aug 13, 2001 09:29 PM
