New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Dies During Idle

Old Nov 11, 2008 | 01:42 AM
  #1  
ColonelFord's Avatar
Thread Starter
My Mazda Mistress
Tenured Member 10 Years
 
Joined: Nov 2008
Posts: 22
Likes: 3
From: Louisville
Dies During Idle

I have a FB GSL with a 12A. The engine idles okay with the choke pulled out. But, after it warms up and the choke releases, it won't keep running during idle unless I keep the choke **** pulled out with a quarter lodged behind the ****. If I let the choke **** retract, it will only continue running if I keep my foot on the gas. The engine will even die on the highway if I take my foot off the gas.

The idle adjustment seems okay, and I've replaced the plugs and wires, air filter, and checked all of the vacuum hoses with no improvement. I don't think it's the shutter valve since I don't hear that characteristic honking noise that it makes when it goes bad.

It did this a few years ago, and I took it to a local import shop that fixed the problem. But, they are no longer in business and I don't know what they did to fix it. Any suggestions on how I might fix this problem myself?
Reply
Old Nov 11, 2008 | 02:24 AM
  #2  
Rx7_Nut13B's Avatar
Red Neck Tony Stark - C2
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,828
Likes: 1
From: Houston Tx
you can tighten the throttle cable up to pull the throttle open just a hair

When you have the Choke pulled out it increases the throttle just a little and about 3/4 way out it turns the choke flap.
Reply
Old Nov 15, 2008 | 08:34 AM
  #3  
Anne87RX's Avatar
Junior Member
 
Joined: Mar 2008
Posts: 15
Likes: 0
From: Central Massachusetts
MA I had one like that

I had to goose the engine at stop lights. Everyone thought I wanted to drag...
Reply
Old Nov 18, 2008 | 05:03 PM
  #4  
toyotanos's Avatar
One more time...
Tenured Member: 15 Years
iTrader: (2)
 
Joined: Nov 2008
Posts: 37
Likes: 0
From: Minnesota
dirty carb/fuel filter?

My 83 GSL 12a had a layer of crap in the bottom of the float bowl when I bought it. After driving for a month it would die at idle (but it also lacked high end power). Cleaned it out and replaced the fuel filter, which was not even a filter anymore. Check your fuel filter, it may be plugged beyond funtionality like mine was, spewing sediment into the carb. Not a fun problem to deal with any way you cut it. Good luck!
Reply
Old Jan 18, 2014 | 01:59 AM
  #5  
ColonelFord's Avatar
Thread Starter
My Mazda Mistress
Tenured Member 10 Years
 
Joined: Nov 2008
Posts: 22
Likes: 3
From: Louisville
Originally Posted by ColonelFord
I have a FB GSL with a 12A. The engine idles okay with the choke pulled out. But, after it warms up and the choke releases, it won't keep running during idle unless I keep the choke **** pulled out with a quarter lodged behind the ****. If I let the choke **** retract, it will only continue running if I keep my foot on the gas. The engine will even die on the highway if I take my foot off the gas.

The idle adjustment seems okay, and I've replaced the plugs and wires, air filter, and checked all of the vacuum hoses with no improvement. I don't think it's the shutter valve since I don't hear that characteristic honking noise that it makes when it goes bad.

It did this a few years ago, and I took it to a local import shop that fixed the problem. But, they are no longer in business and I don't know what they did to fix it. Any suggestions on how I might fix this problem myself?
Just an update: I did a vacuum leak test and noticed a slight increase in rpm when I sprayed starting fluid back around the firewall. I still could not isolate the leak, so I called Mazdatrix and one of the guys there (Mike?) told me it was the anti-afterburn hose. He said it gets a soft spot on it at the bottom of the hose near the exhaust. Sure enough, it was soft there and had a very small split in it. I fixed it with some high temp tape until the new one arrived and it now runs like a champ!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
gxl90rx7
Haltech Forum
6
Jun 30, 2017 11:30 PM
R.O.D
2nd Generation Specific (1986-1992)
34
Jan 6, 2016 12:09 AM
R.O.D
Rtek Forum
1
Sep 23, 2015 01:15 AM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:13 PM.