New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Carb for my 12A

Old Sep 8, 2011 | 03:14 PM
  #1  
carlitosrex7's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2011
Posts: 12
Likes: 0
From: Manchester, NH
NH Carb for my 12A

Which carb would be better for my stock ported 12A, holley or weber? and which fuel pump and regulator should i get?
Reply
Old Sep 8, 2011 | 07:11 PM
  #2  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
there is no better. i ran a Dell'Orto (similar to the Weber DCOE) on my car and my brother has had a Holley on his since the mid-90s. when setup correctly, they both haul ***! i find Webers and their copies a bit easier to tune, but it really comes down to dedication. tuning a Holley is not that bad once you know basic concepts and know where to get the parts you need.

as for pumps, i used a Carter on my car for years and could not have been happier. however Holley and Mallory both make good pumps as well. for a regulator, i used a Holley, but there are other choices.

you will need a gauge to go with the setup and i've read that ReSpeed had a pretty good one.

it's all about research.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
Aug 6, 2017 01:41 PM
rx7inoregon
Old School and Other Rotary
5
Oct 1, 2015 12:44 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:57 AM.