New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

beeping and no power steering

Thread Tools
 
Search this Thread
 
Old 10-20-09, 12:32 AM
  #1  
Drift Happens
Thread Starter
 
goose415's Avatar
 
Join Date: May 2009
Location: Lemoore
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
beeping and no power steering

I keep hearing a beep beep beep
Probably the power steering computer telling you there is a problem with the system. The number of beeps before pausing will indicate the problem.
1-beep, pause, repeat - in case abnormality of speed sensor signal:
In case broken wires or short circuits occur to sensors or harnesses, the buzzer sounds 60-seconds after the engine speed signal of 2200 rpm continues for 18-seconds.
2-beeps, pause, repeat - in case abnormality of engine speed signal:
The buzzer sounds twice and repeats when the vehicle speed signal is missing input and/or no engine speed signal is found (short circuit, broken wire, etc.)
3-beeps, pause, repeat - in case abnormality of stepping motor signal:
The buzzer sounds when there are broken wires or short circuits in coils or harnesses.
4-beeps, pause, repeat - in case abnormality of the power steering microcomputer:
The buzzer sounds 4 and repeats when there are circuit troubles other than with the micro computer.
5-beeps, pause, repeat - in case abnormality of steering sensor signal: Steering sensor is mis-aligned or failed or steering wheel has been improperly installed.

1 beep reapeats... no power steering and my speedometer doesnt work... is it a quick fix? or will my car be down if i start to fix it
Old 10-23-09, 08:13 PM
  #2  
Full Member
 
cerm78's Avatar
 
Join Date: Oct 2008
Location: Costa Rica
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
If I remember correctly, the speed sensor used by the power steering system is in the speedometer itself. You say you don't have speedometer so I guess there is no speed signal to the PS, that's why your PS is not working.

You have to inspect the speedometer in the instrument cluster, may be the speed cable is just disconnected of the instrument cluster. If the cable is broken you'll have to replace it. I don't know how hard it is.
Old 10-23-09, 10:08 PM
  #3  
Drift Happens
Thread Starter
 
goose415's Avatar
 
Join Date: May 2009
Location: Lemoore
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
yeah the cable snapped... i need a new one... and i got another question... on cold starts sometimes my car will die if i dont burp the throttle when the rpms go below 1000... any thoughts
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LMBTG
New Member RX-7 Technical
4
09-02-15 07:01 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM
c0rpse
2nd Generation Specific (1986-1992)
1
08-25-15 11:50 PM



Quick Reply: beeping and no power steering



All times are GMT -5. The time now is 06:16 PM.