New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Antennas

Old Aug 14, 2013 | 11:44 AM
  #1  
amethyst8535's Avatar
Thread Starter
FD3Seven
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Minnesota
MN Antennas

So they don't sell brand new OEM antenna assemblies anymore... such a shame. Mine doesn't retract all the way.

Can they be repaired? Or do people usually just buy new motors?
Reply
Old Aug 14, 2013 | 05:36 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
PM'ed about STATE YOUR CAR..many versions of Rx7's here.
Reply
Old Aug 14, 2013 | 07:21 PM
  #3  
amethyst8535's Avatar
Thread Starter
FD3Seven
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Minnesota
Sorry, car is a 93 RX-7.
Reply
Old Aug 14, 2013 | 11:50 PM
  #4  
silverFDgrl's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Jan 2003
Posts: 12
Likes: 0
From: San Francisco and LA
Is the motor still working? You'll here it running or straining trying to "do it's job".

If the motor works and the antenna just isn't moving, my mechanic told me to pull it all the way out and jam it back in. should work, but you can only do it one or two times.

I pulled mine up about 8 inches and just left it there - i didn't have the guts to yank it out...
Reply
Old Aug 15, 2013 | 11:01 AM
  #5  
amethyst8535's Avatar
Thread Starter
FD3Seven
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Minnesota
Motor still works, goes all the way up in normal fashion. Just doesn't retract all the way.
Interesting that you say that though... I actually did force it down (almost all the way), leaving a painful imprint in my hand. The battery was dead though and the car is at a shop for the time being, so I haven't tested it yet to see if that did anything.
Reply
Old Aug 15, 2013 | 03:59 PM
  #6  
shaunfus123's Avatar
Junior Member
 
Joined: Jul 2013
Posts: 38
Likes: 0
From: Clearwater, FL
I had great luck on ebay and amazon finding a good selection. Try both and see if that helps...
Reply
Old Aug 16, 2013 | 12:05 AM
  #7  
Minnesotamoose's Avatar
Full Member
 
Joined: Aug 2013
Posts: 52
Likes: 0
From: Central MN
I would check the local salvage yards (You're from MN right? UpullRparts had a FD a little while back)
otherwise try disconnecting the motor from the antenna itself and see if it still doesn't want to go down all the way. Chances are good it's clogged with Minnesota road grime goodness
Reply
Old Aug 19, 2013 | 09:53 AM
  #8  
amethyst8535's Avatar
Thread Starter
FD3Seven
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Minnesota
Yeah, from MN... Maplewood. I will have to try UpullRparts.

I looked on ebay a while back. Lots of aftermarket ones as I recall. Will have to keep checking.

Thanks for the replies.
Reply
Old Aug 19, 2013 | 10:34 AM
  #9  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
Originally Posted by amethyst8535
Motor still works, goes all the way up in normal fashion. Just doesn't retract all the way.......
The antenna mast has a slotted plastic strap similar to some of the garage openers on the market. Typically that's what breaks and with a little patience it's something that you could replace yourself. The assembly has to be removed and the old mast mast and strap replaced. I've done it a few times on my car and others. The last time was a couple years ago and you could still buy either the entire assembly or just the replacement mast and strap.
I suspect the mast used on the FD was used on other MAZDAs (and Ford PROBES) of that era and later, at least for a few years. Try calling Ray at MALLOY MAZDA
https://www.rx7club.com/3rd-generati...mazda-1033616/
He's a trusted source here for OEM and an FD owner himself. If anyone can find you one, he can.
Reply
Old Aug 19, 2013 | 02:38 PM
  #10  
turbov6231's Avatar
weekend warrior
 
Joined: Aug 2013
Posts: 28
Likes: 0
From: Orlando,FL
Thx good news
Reply
Old Aug 19, 2013 | 03:17 PM
  #11  
amethyst8535's Avatar
Thread Starter
FD3Seven
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Minnesota
Thanks, definitely need to crack it open now.
Reply
Old Aug 19, 2013 | 09:39 PM
  #12  
ch0i's Avatar
Junior Member
 
Joined: Jul 2013
Posts: 2
Likes: 0
From: Los Angeles
is it possible to swap out the antenna with, say, one from an rx8?
Reply
Old Sep 1, 2013 | 07:12 PM
  #13  
jamesbully's Avatar
Full Member
iTrader: (1)
 
Joined: May 2012
Posts: 107
Likes: 0
From: carstairs
I have seen one guy change his antenna to small like 2 inch antenna and it looked unreal. And it didn't go up and down it just stayed there . I loved the look of it ill try to get pics.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Directfreak
Interior / Exterior / Audio
2
Feb 3, 2002 11:17 PM
cjf
1st Generation Specific (1979-1985)
4
Feb 2, 2002 05:38 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:24 PM.