New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

86 rx7 FC3S Wiring Harness

Thread Tools
 
Search this Thread
 
Old Sep 30, 2016 | 04:29 PM
  #1  
LiveWildMedia's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: May 2016
Posts: 4
Likes: 0
From: South Dakota
86 rx7 FC3S Wiring Harness

I'm parting out an 86 rx7, because I just bought and 87 fc that's in much better shape. I have the complete wiring harness from the 86. Is it worth keeping to have extra connectors and stuff, just in case something fails on the new car? Thanks for the help!
Reply
Old Sep 30, 2016 | 04:49 PM
  #2  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Sounds like a wise choice (always be prepared).
Reply
Old Sep 30, 2016 | 07:38 PM
  #3  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
It's always good to keep spare stuff..IF you have the room..lol!

*note:As a respect to the rules I please ask that you do not try to sell in this section and anyone answering is to NOT ask in THIS section for parts as it is a TECHNICAL section.
(rules are posted stating this above)
Thanks Gents.Rotor on.
Reply
Old Oct 1, 2016 | 08:33 AM
  #4  
LiveWildMedia's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: May 2016
Posts: 4
Likes: 0
From: South Dakota
Originally Posted by misterstyx69
*note:As a respect to the rules I please ask that you do not try to sell in this section and anyone answering is to NOT ask in THIS section for parts as it is a TECHNICAL section.
(rules are posted stating this above)
Thanks Gents.Rotor on.
Thanks, though I truly wasn't selling anything, more asking about advice about whether i should sell/keep... is there a specific section where I should post things like this? I am new to the site...
Reply
Old Oct 1, 2016 | 06:29 PM
  #5  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
As soon as you say "Parting" it is like the doors open up,the party starts and all hell breaks loose!
I am sure your intentions were and are honorable but I have to keep this Tech section BUY and SELL free as we do not need another Classifieds section.20 is enough..lol!
I'm sure you understand that so good luck with your car and rotor on man!.

*you can post parts in the Classifieds AFTER You gain TEN POSTS!.
Reply
Old Oct 1, 2016 | 08:43 PM
  #6  
LiveWildMedia's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: May 2016
Posts: 4
Likes: 0
From: South Dakota
Originally Posted by misterstyx69
As soon as you say "Parting" it is like the doors open up,the party starts and all hell breaks loose!
I am sure your intentions were and are honorable but I have to keep this Tech section BUY and SELL free as we do not need another Classifieds section.20 is enough..lol!
I'm sure you understand that so good luck with your car and rotor on man!.

*you can post parts in the Classifieds AFTER You gain TEN POSTS!.
i get it. No need to repeat yourself. In the future if I have a question similar to the one I asked, where SHOULD I post it? Obviously posting it here wasn't right, so where is the right spot?
Reply
Old Oct 2, 2016 | 12:14 AM
  #7  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
You'll find I am a bit "wild" when I post and sometimes come off as an Effin D*** but in honesty it's just the way I type..lol!
Post any Tech questions you have here or in the various Technical sections (like SEC GEN Specific) and you'll get some feedback.
I'll be glad to help you with any questions,if I can.
I've been through my 86's than you can shake a stick at,and I prefer the S4 over the "electric Snafu" S5 series car any day of the week!
My Last N/A got transformed to a Turbo'ed 357 HP nutbasket..That car hauled ***..!
Reply
Old Oct 2, 2016 | 07:50 AM
  #8  
DC5Daniel's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (10)
 
Joined: Jul 2012
Posts: 1,631
Likes: 89
From: Peachtree City, GA
Originally Posted by misterstyx69
You'll find I am a bit "wild" when I post and sometimes come off as an Effin D*** but in honesty it's just the way I type..lol!
Post any Tech questions you have here or in the various Technical sections (like SEC GEN Specific) and you'll get some feedback.
I'll be glad to help you with any questions,if I can.
I've been through my 86's than you can shake a stick at,and I prefer the S4 over the "electric Snafu" S5 series car any day of the week!
My Last N/A got transformed to a Turbo'ed 357 HP nutbasket..That car hauled ***..!
You're no dick, once people figure out you're Canadian and "different", all is well
Reply
Old Oct 2, 2016 | 09:13 AM
  #9  
erick31876's Avatar
turbo or bust
iTrader: (8)
 
Joined: May 2012
Posts: 870
Likes: 0
From: bristol,pa
I would keep the parts if you have the room,like Styx said. You can post parts in the classified section
Reply
Old Oct 2, 2016 | 09:30 PM
  #10  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Originally Posted by DC5Daniel
You're no dick, once people figure out you're Canadian and "different", all is well
You're on my Bacon list for Xmas Daniel..so ya don't need to suck up...hahahhaa!
I checked out my Lineage on Ancestry.com...
I am 25 percent English..25 percent French..and 50 percent Beer.

Last edited by misterstyx69; Oct 2, 2016 at 09:32 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
39
Dec 4, 2024 12:15 PM
vipernicus42
Canadian Forum
35
May 2, 2018 12:03 AM
2jzfc
2nd Generation Specific (1986-1992)
7
Aug 25, 2016 10:23 AM




All times are GMT -5. The time now is 01:37 PM.