New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

1984 FB rx7 won’t crank cold morning

Thread Tools
 
Search this Thread
 
Old Oct 15, 2018 | 09:56 AM
  #1  
Photo_Boi's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2018
Posts: 39
Likes: 0
From: Kansas City Missouri
1984 FB rx7 won’t crank cold morning

ok so I got up to go to school and I went and started my car it took a few tries because it was 34 degrees but it started and ran I let it sit to warm up I went inside to grab my coffee and my brother so we could go to school and when I came outside it was dead but I could turn the lights on and off but when I turned the key there was nothing anybody know anything that could be the problem
Old Oct 15, 2018 | 03:05 PM
  #2  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
Welcome to the board.

Just so I'm understanding this ... (1) the car started, (2) you left it running, (3) it shut off by itself, (4) it won't restart? Is that it?

Is it cranking at all?

If it is ...
1. might be flooded

If it's not ...
1. starter or loose ground
2. main fusible link
Old Oct 15, 2018 | 03:17 PM
  #3  
Photo_Boi's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2018
Posts: 39
Likes: 0
From: Kansas City Missouri
Yes that is it and no it won’t crank the lights in the cabin won’t even turn on just the headlights no turn signals or anything
Old Oct 15, 2018 | 03:33 PM
  #4  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
Check the driver's side strut tower and locate the fusible links. It sounds like you lost the main. You can replace them with
Bussman FLF-type fuses Bussman FLF-type fuses
. I would advise replacing all 3 at the same time. I can't remember the ratings (amps) you actually need once you convert it from the resistances listed.

Also, I'll link this thread with the one you started in the Gen 1 forum, and close this one.

Your Gen 1 forum thread

Last edited by diabolical1; Oct 15, 2018 at 03:36 PM.
Old Oct 15, 2018 | 03:35 PM
  #5  
Photo_Boi's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2018
Posts: 39
Likes: 0
From: Kansas City Missouri
Thank you I will try that
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Siraniko
West RX-7 Forum
32
Apr 2, 2008 11:00 PM
Avatar
2nd Generation Specific (1986-1992)
4
May 4, 2004 01:09 AM
Avatar
2nd Generation Specific (1986-1992)
3
May 3, 2004 08:06 PM
streetpower
3rd Generation Specific (1993-2002)
1
Jan 7, 2003 10:46 PM




All times are GMT -5. The time now is 08:25 PM.