New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

1979 rx7

Thread Tools
 
Search this Thread
 
Old 02-07-14, 12:59 PM
  #1  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
1979 rx7

Hi guys im new too form trying too get post count up as well as figure out some problems with my 1st gen

Well i just recently got my rx back on the road and its not running the greatest iv used this site for about ten years and its hlped me out alot but sadly didnt become a member till now

So im pretty sure i either have a bad coil or a faulty ground somewere.
The car starts alright half the time. It ideles aliright except for the od hickup every 2-3 secs. the rpm gauge works but when it sputters kinda sounds like its gunna stall a bit the rpms fliker up like theres a short or something this happens well driving too.
also when i get too 3000-5000 rpms the car runs perfect. iv changed the sparkplugs lots and they always seem too be really dirty like carbon built up.

Any ideas?
Old 02-07-14, 01:19 PM
  #2  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Also this wire on my coil d osnt go anywhere and iv seen a video off a jumper on it too positive on battery left coil yellow wire.

1979 rx7-forumrunner_20140207_111707.jpg
Old 02-07-14, 01:21 PM
  #3  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Sorry heres the link too the video were the jumpers on

Old 02-07-14, 03:07 PM
  #4  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
I took a video of my car driving today was hopen it help source the problem out for all u experts

Old 02-07-14, 05:27 PM
  #5  
roTAR needz fundZ

iTrader: (1)
 
Join Date: Aug 2002
Location: Freeland, MI
Posts: 2,614
Likes: 0
Received 31 Likes on 31 Posts
It sounds to me like the carb needs a good rebuild if it hasn't in awhile. Does the car smell rich when its running? (Eyes start to burn feeling) also have you done a compression check recently?
Old 02-07-14, 07:14 PM
  #6  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,817
Received 306 Likes on 267 Posts
Originally Posted by fearfulear69
iv changed the sparkplugs lots and they always seem too be really dirty like carbon built up.

Any ideas?
from what i've seen in your description and video, my gut says you probably need to rebuild the carburetor. however, it costs nothing but some time to throw a timing light on the thing and see where you are. the amount of crank time got me thinking your timing may be off in addition to likely carb issues.


EDIT

what i originally said above applied to the first video with the FB. i just started watching your other video, with your SA, i will have to come back and post again when i'm finished. however, it wouldn't hurt to put a light on it as well.

Last edited by diabolical1; 02-07-14 at 08:27 PM.
Old 02-07-14, 08:34 PM
  #7  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up Dont know what too put here....

So today i spent awhile shoveling my 85 rx7 out of four feet of snow too get hood open too get wires plugs coils and distrubuter floormats ect omg too forever minus 36 today in prince george argggg

Anyways i put new plugs and wiress on and cleaned up both the grounds too motor and under fusable links and connections too coils and new battery terminals and cleaned points on distributor and still runs the same as before well maby a weee better but not really lol

I was gunna put the new coils in from the 85 rx7 they arnt stock and only have 250 km on them. they look the same and are wired the same as the 79 but still i was unsure so i wanted too ask the experts ?

The distributor on the other hand is differnt then the one in the 79 is it still compatible?

Iv had the car forawhile now and my grandma b4 me theres only 178000 on it with no carb rebuild yet and only other changed parts are starter and altenator. I will be ordering a carb rebuild kit tonight or tomarrow for it after i check the timeing at the shop and compression.
Can u recommend a rebuild ket or just go too lordco napa cheiften and get one there was thinking someone might know of a good one online somewhere?
ohhh ya and yes my eyes burn hahahahaha

Here is a pic of my 85 that i dug out today lol
ohhh and i got another vid ill post link soon of the 85 and 79 running again


Thx for the advice guys really apprtiate it anything else u could think of if those two things dont work for me?
Attached Thumbnails 1979 rx7-20131128_201213.jpg   1979 rx7-20131128_201222.jpg   1979 rx7-20131128_201238.jpg   1979 rx7-20131128_201302.jpg   1979 rx7-20131128_201337.jpg  

Old 02-07-14, 09:22 PM
  #8  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
heres the link too the new video :)


let me know what ya think.
Old 02-18-14, 07:07 PM
  #9  
Full Member
Thread Starter
 
fearfulear69's Avatar
 
Join Date: Jan 2014
Location: canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Bump.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
02-26-19 02:04 AM



Quick Reply: 1979 rx7



All times are GMT -5. The time now is 02:55 PM.