12a rebuild
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Fort Mill SC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
12a rebuild
i have a 12a street port that has low compression in the front rotor. my question is could i pull the engine and only open up the front housing and just rebuild that rotor?
#6
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Fort Mill SC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#7
Racing is life!
iTrader: (2)
Join Date: Jan 2003
Location: Grapevine, TX
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
http://www.atkinsrotary.com/store/pr...4&bestseller=Y
http://www.mazdatrix.com/b2.htm
Mazdatrix will put a kit together for you. Atkins is complete. Lots of members have used Atkins kits. I'm not sure if they use Mazda apex seals or their own design for the 12a.
Have never heard of the Rivera kit before, price looks right. Just make sure what your getting.
http://www.mazdatrix.com/b2.htm
Mazdatrix will put a kit together for you. Atkins is complete. Lots of members have used Atkins kits. I'm not sure if they use Mazda apex seals or their own design for the 12a.
Have never heard of the Rivera kit before, price looks right. Just make sure what your getting.
Trending Topics
#8
#9
http://www.atkinsrotary.com/store/pr...4&bestseller=Y
http://www.mazdatrix.com/b2.htm
Mazdatrix will put a kit together for you. Atkins is complete. Lots of members have used Atkins kits. I'm not sure if they use Mazda apex seals or their own design for the 12a.
Have never heard of the Rivera kit before, price looks right. Just make sure what your getting.
http://www.mazdatrix.com/b2.htm
Mazdatrix will put a kit together for you. Atkins is complete. Lots of members have used Atkins kits. I'm not sure if they use Mazda apex seals or their own design for the 12a.
Have never heard of the Rivera kit before, price looks right. Just make sure what your getting.
#10
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Fort Mill SC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post