The subframe is in and the project is rolling =)
#77
Attack Gas Station!!!!
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: May 2004
Location: Catonsville, Maryland
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
yeh... I'm thinking of going hybrid on my van with the electric motor doing the assist thing like on the new honda v6's... maybe use the a/c pump bracket holes and put a dual serpentine belt pulley on the crankshaft.
#78
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Damn it's been awhile since I updated this thread
Here's the lowdown lately:
Bunch of stuff installed, bunch of new parts bought, wiring is in progress, headeres are installed, exhaust goes on this week, wheels are on the car, hopefully it will be running someday. Nuff said, here's some pics
One of the new wheels:
Header clearance (tons of room):
Plenty of ground clearance:
Radiator and fan have more clearance than the FC/350 does:
First time I had the bumper cover and the lights bolted on, although Corey has since pulled the lights to work on wiring them correctly:
New partially installed shifter boot, courtesy of my wife, Bridgette (the old one didn't fit the shifter):
![eek](https://www.rx7club.com/images/smilies/eek.gif)
Here's the lowdown lately:
Bunch of stuff installed, bunch of new parts bought, wiring is in progress, headeres are installed, exhaust goes on this week, wheels are on the car, hopefully it will be running someday. Nuff said, here's some pics
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
One of the new wheels:
![](http://www.mustangmods.com/data/7904/left_front_new_wheel3.jpg)
Header clearance (tons of room):
![](http://www.mustangmods.com/data/7904/passengerclearance2.jpg)
Plenty of ground clearance:
![](http://www.mustangmods.com/data/7904/collectorclearance.jpg)
Radiator and fan have more clearance than the FC/350 does:
![](http://www.mustangmods.com/data/7904/fanclearance.jpg)
First time I had the bumper cover and the lights bolted on, although Corey has since pulled the lights to work on wiring them correctly:
![](http://www.mustangmods.com/data/7904/rearendofcar.jpg)
New partially installed shifter boot, courtesy of my wife, Bridgette (the old one didn't fit the shifter):
![](http://www.mustangmods.com/data/7904/shifterboot1.jpg)
#79
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
The front end, yet to be washed:
The new R1 lip and part of the engine bay:
![](http://www.mustangmods.com/data/7904/front_lip_1.jpg)
What the wheels look like online
:
The Magnaflow muffler that's going in this week:
![](http://www.mustangmods.com/data/7904/magnaflow.jpg)
The motor in it's home, though not yet complete:
The scratches that I managed to cause in the brand new paint by dropping my fu&*^%ng motorcycle in the garage a few weeks ago:
![](http://www.mustangmods.com/data/7904/radiator_shot_1.jpg)
The new R1 lip and part of the engine bay:
![](http://www.mustangmods.com/data/7904/front_lip_1.jpg)
What the wheels look like online
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
![](http://www.mustangmods.com/data/7904/mm_mm113_ci3_l.jpg)
The Magnaflow muffler that's going in this week:
![](http://www.mustangmods.com/data/7904/magnaflow.jpg)
The motor in it's home, though not yet complete:
![](http://www.mustangmods.com/data/7904/motorin5.jpg)
The scratches that I managed to cause in the brand new paint by dropping my fu&*^%ng motorcycle in the garage a few weeks ago:
![](http://www.mustangmods.com/data/7904/quarterscratch1.jpg)
#80
Do It! Do It!
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: Mar 2004
Location: Crofton, MD
Posts: 1,994
Likes: 0
Received 0 Likes
on
0 Posts
looking good man...
That sucks about the scratches, I did a similar thing a year or so ago, some **** dropped that was hanging in my garage and caused some havoc to 2 week old paint :\
That sucks about the scratches, I did a similar thing a year or so ago, some **** dropped that was hanging in my garage and caused some havoc to 2 week old paint :\
#84
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
If I get around to buying an enclosed trailer, this one will be for sale ![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Pay for the supercharger =)
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Originally Posted by YF19
put a supercharger on it =).
#87
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BigPimpin'
Man, that's some nice work! Ya gonna be done in time for OC?
#88
Originally Posted by Crash Test Joey
Pay for the supercharger =)
6psi ..wooooowoooooooo
#89
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by YF19
I got one for a H22 (5th gen prelude) that's sitting in my garage doing nothing =)
6psi ..wooooowoooooooo
6psi ..wooooowoooooooo
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
#90
Senior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Oct 2004
Location: Baltimore
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
the only kit that people have found to work ... from my research is the vortech GTO 04/05 kit...
but i havnt looked at it all that much
if i can finish up this wiring quickly we should at least be able to try and crank the motor this week
but i havnt looked at it all that much
if i can finish up this wiring quickly we should at least be able to try and crank the motor this week
#91
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
I finally got the steering shaft replaced, and it works great. I wasn't in a big hurry with work kicking my *** and all. I finally got around to mounting the pods and covers for the headlights today.
These pictures make me realize how badly the car needs to be washed after sitting in the garage for the last 6 weeks. Still fired right up though, all I had to do was reach in the window and turn the key
These pictures make me realize how badly the car needs to be washed after sitting in the garage for the last 6 weeks. Still fired right up though, all I had to do was reach in the window and turn the key
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
![](http://www.mustangmods.com/data/7904/flushlights6.jpg)
![](http://www.mustangmods.com/data/7904/flushlights1.jpg)
![](http://www.mustangmods.com/data/7904/flushlights2.jpg)
![](http://www.mustangmods.com/data/7904/flushlights3.jpg)
![](http://www.mustangmods.com/data/7904/flushlights4.jpg)
![](http://www.mustangmods.com/data/7904/flushlights5.jpg)
#94
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by falken-ls1fd
What did you use to replace the steering shaft with?
Any pics of the exhaust on the car, underneath?
Any pics of the exhaust on the car, underneath?
The exhaust is a 3" Y into single 3" into single Magnaflow. JTR/Sanderson made a run of custom LS1-FD headers. I got a set of 1/78 ceramic coated. Jeff's Muffler in Owings, MD did the work once I installed the headers. Mandrel bent and tucked in there very nicely. He's at www.insaneracing.com
![](http://www.mustangmods.com/data/7904/magnaflow_on1.jpg)
![](http://www.mustangmods.com/data/7904/magnaflow_on2.jpg)
![](http://www.mustangmods.com/data/7904/magnaflow_on3.jpg)
![](http://www.mustangmods.com/data/7904/magnaflow_on4.jpg)
#95
looks sweet! nice muffler..i need to find a cool polished one like that but my exhaust is 3.5 inch. and the hooker aero chamer on there currently is too damn loud! i even put a 3.5 inch bullet muffler in front of the hooker, and although it killed some drone, its still too loud.
by the way, nice magnaflow transition y pipe
i used one of them on my old firebird:
http://207.127.219.37/jethotymod.htm
by the way, nice magnaflow transition y pipe
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
http://207.127.219.37/jethotymod.htm
#97
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2MCHPWR
looks sweet! nice muffler..i need to find a cool polished one like that but my exhaust is 3.5 inch. and the hooker aero chamer on there currently is too damn loud! i even put a 3.5 inch bullet muffler in front of the hooker, and although it killed some drone, its still too loud.
by the way, nice magnaflow transition y pipe
i used one of them on my old firebird:
http://207.127.219.37/jethotymod.htm
by the way, nice magnaflow transition y pipe
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
http://207.127.219.37/jethotymod.htm
Magnaflow also makes a single 3.5 in/dual 2.5 out that you could put nice tips on.
My exhaust will flow enough for about 500-550 hp before I need to go bigger - at that point I'll just do dual 3"
Originally Posted by sudseh
That car sounds un-*******-believably cool. Now it just needs a top mount supercharger and a shaker hood. (j/k)
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)