Wargasm

I need a new turbine housing set up for my RX-7. Old one broke and I don't think it's fixable.

Anyone know of a reasonably priced shop near DC that can either weld a flange onto a housing (if I buy online), or can sell me a housing + flange + make it match my existing setup?

Thanks for any leads. I'm near Rockville, MD.

B

Fd3BOOST

iTrader: (7)

Big B!
I have a set of 99s I'm going to use and my motor is out. I'll sell you the set of 93 spec twins that are on the engine now for $200 if you want them. They were boosting fine, no smoke etc...

Cell is 301-535-6155.

KNONFS

iTrader: (14)

Brian,

I have a used 1.0 hot side for a T04S, $75 if you pick it up

If you wish to fix your current one, I know of two welders that should be able to tackle the job!

1 - Piper motorsports
2 - A lady on the local motorcycle forum, I dont have her info with me, but can get it if you are interested

Wargasm

Heya, I'm single turbo, remember

Good to see you're still here!

Wargasm

Heya, Thanks for the reply. I took it by Piper last summer (yes it has been broken that long)... and they said they were reluctant to try a repair because it might break again and they didn't want an unhappy customer. They did not flat out say "no", but they didn't seem like they wanted to do it.

I would love the contact info for the motorcycle lady especially if she's near NOVA area so I could just take the parts over to her, see what we could do and do it or not.

As for your housing - what type of output adapter is on it? V band? Flange? How many miles/age is on that puppy?


See: https://www.rx7club.com/single-turbo...xable-1041714/

for the damage I'm looking at. It's LOUD AS HELL!

Thanks,
Brian

KNONFS

iTrader: (14)

Its a V-band and less than 5000 miles on it, I replaced it with a .8x (next lower one for a divided manifold)

Looking for her phone, will pm you the info.

Fd3BOOST

iTrader: (7)

No I didn't remember, what you had on there. Sorry I tried...
I sold my old car which was single turbo too and was off here for a few years.
I bought another FD last summer and have been back since then.

moneymaker42141983

iTrader: (3)

I would just put a new housing on it. I have a bunch laying around. I would have to see yours. If you.