Need turbo help in DC
I need a new turbine housing set up for my RX-7. Old one broke and I don't think it's fixable.
Anyone know of a reasonably priced shop near DC that can either weld a flange onto a housing (if I buy online), or can sell me a housing + flange + make it match my existing setup? Thanks for any leads. I'm near Rockville, MD. B |
Originally Posted by Wargasm
(Post 11732947)
I need a new turbine housing set up for my RX-7. Old one broke and I don't think it's fixable. Anyone know of a reasonably priced shop near DC that can either weld a flange onto a housing (if I buy online), or can sell me a housing + flange + make it match my existing setup? Thanks for any leads. I'm near Rockville, MD. B
Big B! I have a set of 99s I'm going to use and my motor is out. I'll sell you the set of 93 spec twins that are on the engine now for $200 if you want them. They were boosting fine, no smoke etc... Cell is 301-535-6155. |
Originally Posted by Wargasm
(Post 11732947)
I need a new turbine housing set up for my RX-7. Old one broke and I don't think it's fixable.
Anyone know of a reasonably priced shop near DC that can either weld a flange onto a housing (if I buy online), or can sell me a housing + flange + make it match my existing setup? Thanks for any leads. I'm near Rockville, MD. B I have a used 1.0 hot side for a T04S, $75 if you pick it up :icon_tup: If you wish to fix your current one, I know of two welders that should be able to tackle the job! 1 - Piper motorsports 2 - A lady on the local motorcycle forum, I dont have her info with me, but can get it if you are interested |
Originally Posted by Fd3BOOST
(Post 11735034)
Big B!
I have a set of 99s I'm going to use and my motor is out. I'll sell you the set of 93 spec twins that are on the engine now for $200 if you want them. They were boosting fine, no smoke etc... Cell is 301-535-6155. Good to see you're still here! |
Originally Posted by KNONFS
(Post 11735081)
Brian,
I have a used 1.0 hot side for a T04S, $75 if you pick it up :icon_tup: If you wish to fix your current one, I know of two welders that should be able to tackle the job! 1 - Piper motorsports 2 - A lady on the local motorcycle forum, I dont have her info with me, but can get it if you are interested I would love the contact info for the motorcycle lady especially if she's near NOVA area so I could just take the parts over to her, see what we could do and do it or not. As for your housing - what type of output adapter is on it? V band? Flange? How many miles/age is on that puppy? See: https://www.rx7club.com/single-turbo...xable-1041714/ for the damage I'm looking at. It's LOUD AS HELL! Thanks, Brian |
Originally Posted by Wargasm
(Post 11735197)
Heya, Thanks for the reply. I took it by Piper last summer (yes it has been broken that long)... and they said they were reluctant to try a repair because it might break again and they didn't want an unhappy customer. They did not flat out say "no", but they didn't seem like they wanted to do it.
I would love the contact info for the motorcycle lady especially if she's near NOVA area so I could just take the parts over to her, see what we could do and do it or not. As for your housing - what type of output adapter is on it? V band? Flange? How many miles/age is on that puppy? See: https://www.rx7club.com/single-turbo...xable-1041714/ for the damage I'm looking at. It's LOUD AS HELL! Thanks, Brian Looking for her phone, will pm you the info. |
Originally Posted by Wargasm
(Post 11735190)
Heya, I'm single turbo, remember :) Good to see you're still here!
I sold my old car which was single turbo too and was off here for a few years. I bought another FD last summer and have been back since then. |
I would just put a new housing on it. I have a bunch laying around. I would have to see yours. If you.
|
All times are GMT -5. The time now is 08:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands