Sweet man. She should be pretty raspy with the Exhaust ports as big as they are. Should pull nicely. You should probly get the RB Street port intake and carb setup. Well you Auto X so nvm. Hmmm need something better than the stock intake and carb...FI? Ive still got mine to go on aswell

 

Looks like a good setup. I would still go with a set of webs on her and a j port AKA big bridge port. That thing will scream.

 

Well the irons are streetported and the housings are race ported (but a little squred off on the bottom from the previous port job) based off racing beat templates. It will stay crab'd, and a nikki for now. Next on the list is suspension.

 

did you ever get that front sway bar?

you need better tires/wheels first

 

That is on the "suspension" list. After suspension, is tires/wheels. Then ignition, followed by intake. Once I get there, it will be a new rear end. At this point I think I would swap in a TII, and some better brakes....when does the list end

 

It never ends man. Thats how i got started with all my cars and they all end up full on race cars.LOL

 

Hey people... just stoppin by to say hi... No 7 any more... Just the 3.. I may come to the meet this coming sunday... see yall around.

 

So im gettin rid of the 7. I have no time for it right now. Wont start as well. My fault for not going out to start it often. Hey Wes you need anything? I got a set of steelies that with 205's put the tire out to the edge of the fenders. Looks pretty sexy lol.

 

Hey guys, I finally got around to fixing up my fc and now it's rollin'

Anyone wanna hang out? I'm in the Silver Spring/Rockville area

 

What size are the wheels? How about the ignition set up, you have the TFIDIS right?

 

there 13's Just a different offset, Maybe a lill wider but if they are not by too much. Also I have brand new lower control arms for the rear. Ive got a few other things but cant remember. Yes I do have a variation of the TFIDIS the TFIDIS uses the older ford TFI ignition coils, Im using MSD Blaster 2 Coils. But there the same in both ways

 

Most likely not interested in 13" wheels, unless they be reeaal cheap. But let me know about the ignition set up, it's next on my to do list.

 

30 bucks for the wheels. Only two have tires. There worn but still useable toyo proxies RA1 one rim has a dent in the lip. Its steel so a bfh should fix that. Ive got no use for the ignition setup. Id say 60 for everything. Thatll include the 2nd gen plugs. All that needs to be done is me swapping back to the old setup.

 

You can keep the wheels. Once you have the ignition swapped, we can meet up. No need to hurry.

 

Ill do what i can. Still trying to get my talon on the road. New turbo blew and caused a engine bay fire

 

How do you guys feel about a meet sometime soon? I would like to do something similar to last years at that barbecue joint, who set that up last year?

 

We used to do monthly meets at the Fudd's in Columbia... I could be convinced to go though I don't have a 7 or an 8 anymore.

 

imma 18 year old Maryland Guy just picked up a 88 vert . and am gonna need guidence.

 

NO!!!!!!!!!!!!!!!!!! Im gonna be 7 less here soon. Hey Wes before I forget you need strut tower brace or Suspension Technique front and rear sway bars? Car has them. I can pull the brace no prob. Maybe the rear bar but the front bar looks like a pain. Just wondering. If not there goin with the car

 

I was thinking about having a BBQ at My new house in MT Airy if anyone is down.

 

No thanks on the suspension parts.


I am always down for a BBQ.

 

Cool. Just need to find out who all is in and what would be a good weekend.
It will be a BBQ/pool party/ car meet.

 

Does anyone have an engine hoist, and or stand that I could borrow/rent for a little while?

 

any FD or FC rx7 down to cruise to Hyperfest this weekend, theres 3 groups of cars meeting up in Gaithersburg, MD at 7:30am, cruise leaves at 8am sharp

 

I have a cherry picker and like 5 engine stands. how long do you need them for?