list of all the mechanics in the NE area.
German Chocolate Suplex
Joined: Nov 2003
Posts: 280
Likes: 0
From: Virginia
Central Viiginia
Newbie
Joined: Sep 2007
Posts: 2
Likes: 0
From: Rochester, NY
BUILD, TUNE, RACE, REPEAT
Joined: Jan 2005
Posts: 167
Likes: 0
From: NH/MA
AUTOELITE
ma/nh/ct area
nissan, mazda, toyota performance
left trick engineering because there scared of rotaries and opened up my own place.
moving soon to our new 4000sq/ft facility in derry,NH
ma/nh/ct area
nissan, mazda, toyota performance
left trick engineering because there scared of rotaries and opened up my own place.
moving soon to our new 4000sq/ft facility in derry,NH
Full Member
Joined: Sep 2007
Posts: 102
Likes: 0
From: New York
Newbie
Joined: Sep 2007
Posts: 2
Likes: 0
From: Rochester, NY
Rotary mechanic in upstate/western NY
Repeating strong recommendation for Tony DeSimone.
Tony's Quality Repair in Rochester.
(585) 436-4360
535 Jay Street
Rochester NY 14611
He was dealer trained on rotary engines and owns his own 1st gen RX-7.
Call him!
Good luck!!
Tony's Quality Repair in Rochester.
(585) 436-4360
535 Jay Street
Rochester NY 14611
He was dealer trained on rotary engines and owns his own 1st gen RX-7.
Call him!
Good luck!!
Senior Member
Joined: May 2001
Posts: 297
Likes: 0
From: laurel, md usa
A friend of mine has opened his own shop in Tyson comer area. His name is Oui and he owned several rotary powered machines, FDs, FCs and Datsun with 13b swap that he has done himself.
I have known him personally for several years and he is one of the best car mechanics I know.
He doesn’t post here, so I am posting this for him:
Shop's address is:
VIP Tuning & Auto Service
1524 F Spring Hill Road
McLean, VA 22102
703 883 0403
He can do any basic maintenance for all generation RX-7 and RX-8. He can also tune for AFR with wideband.
He has tunning software for AEM and Power-FC.
He also has a fender-rolling tool locally.
I have known him personally for several years and he is one of the best car mechanics I know.
He doesn’t post here, so I am posting this for him:
Shop's address is:
VIP Tuning & Auto Service
1524 F Spring Hill Road
McLean, VA 22102
703 883 0403
He can do any basic maintenance for all generation RX-7 and RX-8. He can also tune for AFR with wideband.
He has tunning software for AEM and Power-FC.
He also has a fender-rolling tool locally.
Senior Member
Joined: May 2001
Posts: 297
Likes: 0
From: laurel, md usa
I waited a few years and 20,000 miles for this recommendation.
I'll personally recommend Gibby Dobson for turbo rebuilding. I interviewed Gibby 7 years ago to clean and map my fuel injectors for my rx-7, well he didn't have the adapters for my odd foreign gasoline car as he services the diesel industry. He cleaned them but wasn't able to map, I don't think he charged me. He took me on a tour of his shop, he specializes in diesel pumps, injectors and turbos, it was impressive, I knew I had a good guy.
3 years later, I had him rebuild my twin turbos. 4 years and 20,000 miles ago and still good boost. They came back cleaned and painted, very professional and priced competitively.
I think they require that you pull the part off your vehicle and they do ship nationally.
B & D Fuel Injection Service, Inc.
4706 Raleigh Road
Temple Hills, MD 20748
Local: 301-899-1626
Fax: 301-899-2051
Toll Free: 1-800-603-1626
E-mail: info@dieselpump.com
www.dieselpump.com
I'll personally recommend Gibby Dobson for turbo rebuilding. I interviewed Gibby 7 years ago to clean and map my fuel injectors for my rx-7, well he didn't have the adapters for my odd foreign gasoline car as he services the diesel industry. He cleaned them but wasn't able to map, I don't think he charged me. He took me on a tour of his shop, he specializes in diesel pumps, injectors and turbos, it was impressive, I knew I had a good guy.
3 years later, I had him rebuild my twin turbos. 4 years and 20,000 miles ago and still good boost. They came back cleaned and painted, very professional and priced competitively.
I think they require that you pull the part off your vehicle and they do ship nationally.
B & D Fuel Injection Service, Inc.
4706 Raleigh Road
Temple Hills, MD 20748
Local: 301-899-1626
Fax: 301-899-2051
Toll Free: 1-800-603-1626
E-mail: info@dieselpump.com
www.dieselpump.com
Rotary Enthusiast
Joined: Jul 2006
Posts: 831
Likes: 0
From: RAINELLE WV
Full Member
Joined: Mar 2006
Posts: 110
Likes: 0
From: CINCINNATI
tricent we turn housings full rebuilds, any driveability problem factory trained rotary tech all ase cert, quality at a fair price if you want to half *** or cut corners call someone else if you want it done right look us up in the phone book cincinnatti ohio pistons suck....but isn't that their job?
Rotary Parking Only
Joined: Jun 2006
Posts: 248
Likes: 0
From: Bridgeport, CT
New shop in CT
K2 Automotive LLC
1250 Barnum Avenue
Stratford, CT 06614
Phone (203)380-2429
Anything Rotary from stock rebuilds to porting to installing a custom welded roll cage in your car. The guy's name is Peter Koch and he has been trained at Mazda Full Circle Service. He is currently doing a Full Bridgeported motor for a REPU as well as some mild porting and rebuild of another engine. He also fabricates rotary adapters for any engine stand. Only uses the best of the best products.
K2 Automotive LLC
1250 Barnum Avenue
Stratford, CT 06614
Phone (203)380-2429
Anything Rotary from stock rebuilds to porting to installing a custom welded roll cage in your car. The guy's name is Peter Koch and he has been trained at Mazda Full Circle Service. He is currently doing a Full Bridgeported motor for a REPU as well as some mild porting and rebuild of another engine. He also fabricates rotary adapters for any engine stand. Only uses the best of the best products.
Full Member
Joined: Sep 2007
Posts: 102
Likes: 0
From: New York
FOR ALL YOU UPSTATE NY RX7 OWNERS:
After making quite a few phone calls to shops in the Capital District in the Fall when I needed to get my 7 on a lift to change the drivetrain, I found a fairly new shop that was actually willing to work on a rotary. They are fairly familiar with RX7's from having a couple lifelong 7-enthusiast friends who aren't with us anymore (they both drove 2nd gens) and definitely got very excited when I brought mine in. So if you need any work done and want to give them a shot, call and mention I sent you. My experience there was definitely worthwhile.
Stephen Hepp's Auto Service
122 Ontario Street
Cohoes, NY 12047
(518) 237-8170
After making quite a few phone calls to shops in the Capital District in the Fall when I needed to get my 7 on a lift to change the drivetrain, I found a fairly new shop that was actually willing to work on a rotary. They are fairly familiar with RX7's from having a couple lifelong 7-enthusiast friends who aren't with us anymore (they both drove 2nd gens) and definitely got very excited when I brought mine in. So if you need any work done and want to give them a shot, call and mention I sent you. My experience there was definitely worthwhile.
Stephen Hepp's Auto Service
122 Ontario Street
Cohoes, NY 12047
(518) 237-8170
Hey guys, i didn't see this thread mentioned at all
https://www.rx7club.com/showthread.p...ngine+builders
it's in the general tech support section, tons and tons and tons of builders across the country... lots of ones that were not mentioned in NE and the east coast...
hope this helps!
also, I've been talking with Chris Rogers for a while now... He's very Knowledgeable, friendly, and generally knows his stuff... He has an FD now.. used to own a blown FB.. YAY
Have a good one
https://www.rx7club.com/showthread.p...ngine+builders
it's in the general tech support section, tons and tons and tons of builders across the country... lots of ones that were not mentioned in NE and the east coast...
hope this helps!
also, I've been talking with Chris Rogers for a while now... He's very Knowledgeable, friendly, and generally knows his stuff... He has an FD now.. used to own a blown FB.. YAY
Have a good one
mechanics in the NE areas
If anyone is in DE I recommend
http://cabaynes.com/
I bought a car from Charlie and Dan recently. I should be able to pick up the car within the month. Before I purchased though, they drove the car all the way to NJ to get it compression tested by Ihor.
The engine is a rebuilt JDM that they did themselves. They told me that when they got the engine, it was in really bad shape. They worked hard to clean and rebuild the engine and it shows.
The compression test results were very impressive. I believe the front ranged from 120 - 122 and the read from 119 - 121, I forgot the exact numbers. I think everyone was quite impressed. These guys really love their 7s and it shows.
Thanks for the car fellas!
http://cabaynes.com/
I bought a car from Charlie and Dan recently. I should be able to pick up the car within the month. Before I purchased though, they drove the car all the way to NJ to get it compression tested by Ihor.
The engine is a rebuilt JDM that they did themselves. They told me that when they got the engine, it was in really bad shape. They worked hard to clean and rebuild the engine and it shows.
The compression test results were very impressive. I believe the front ranged from 120 - 122 and the read from 119 - 121, I forgot the exact numbers. I think everyone was quite impressed. These guys really love their 7s and it shows.
Thanks for the car fellas!
Junior Member
Joined: Oct 2007
Posts: 43
Likes: 0
From: VA
help
iam looking for a shop that can help me with my car its in bad shap right now i had it at a shop and they closed down and now my **** is everywere and iam missing some parts. iam looking at working on it slowly and piceing it together again anyone that can help in VA Beach or close by let me know at rodrigui@lhd5.navy.mil thanks.
