Hampton Roads (SE Virginia) Rotary Club
Originally posted by sman789
well o can't drive my 7 tonight....gotta ask screwd08 to get me:o
https://www.rx7club.com/showthread.p...hreadid=322486
well o can't drive my 7 tonight....gotta ask screwd08 to get me:o
https://www.rx7club.com/showthread.p...hreadid=322486
Read this web page, and for that fact read all of Felix's web site. It sh
ould be required reading for new RX7 owners.
http://members.ij.net/mrmazda/cfaqtext.html#NOSTART
You are alrady basically down to "Five" in his list. Read all of them, but do what he says in five.
Pull the plugs out. Disconnect the fuse to the fuel pump. Crank it in short bursts until you see no fuel comming out of the spark plug holes, just air.
Put about 1 oz of automatic Transmission fluid (not oil) in the lower spark plug holes. Turn the engine over by hand a few times or slowly crank it with the starter, but just little bumps. You want to just spread the ATF around. If you can, put in NEW plugs. It probably needs them anyway if this happened. Then reconnect the fuses, and wires and start it. Let the smoke clear (it will smoke quite a lot for a few minutes) but it will clear up and be normal.
Most important, don't start it and cut it off after running for less than 5-10 minutes anymore.
Search the web for GSL SE unflooding proceedure (as they are the most prone to this) for more info if you don't believe what me or Felix recommends.
Also check out this site.....
http://www.rx-7.com/tech/unflood-se.html
Last edited by calvin; Jun 30, 2004 at 03:50 PM.
i was in the 93 vr fd with the stock chrome rims...apexi fmic, apexi intakes, etc. I have done a ton since then...ks hood, gtc front...all fuel upgrdes and the single isgoing in this weekend and tuned next week hopefully..oh yeah and i got some 18's..lol I actualy think i remember your car...what time are you guys meeting up..i can meet you guys on 64 onthe way...
--nick
--nick
Originally posted by RichRotorhead
...if he knows what's good for him, he will follow thru with that plan!!!
-Rich
...if he knows what's good for him, he will follow thru with that plan!!!

-Rich
I counted about 12 people last night. Pretty good group. Hope we do it again.
Originally posted by sman789
got it workin, when we took out the plugs we saw they were in pretty bad shape, re replaced the plugs ans wires and she fired up like normal
got it workin, when we took out the plugs we saw they were in pretty bad shape, re replaced the plugs ans wires and she fired up like normal
Glad it is working now. Hope to see your car at an event sometime soon.
Originally posted by calvin
You had done some sort of oil in the rotor housings right? That sort ot means your plugs were showing their age.
Glad it is working now. Hope to see your car at an event sometime soon.
You had done some sort of oil in the rotor housings right? That sort ot means your plugs were showing their age.
Glad it is working now. Hope to see your car at an event sometime soon.
Hey guys ,,,,Back again.... Please keep me posted on the next meeting. ramartin1@***.net or 757 869 2169. To many 7's to fix up. Still trying to put together the 93 CYM,,,, It needs alot of parts...
Later Randy
Later Randy
cause of the problem
so i ifnally take my car on a lil trip up to richmond. i was more worried about over heating in traffic and to my surprise my car did just fine. i get up there on the way my gas pedal got a lil bit harder to push. so i get to turbox2's (nick's) house i let it cool down. as i leave, the pedal still feels the same. i get into 3rd and the pedal feels like its dead and the car starts to whind down and shut off. so i pull over hit the switch for the pump and it starts up with the pump off then i throw it on and im fine the drive home.
any possible reason for this?
any possible reason for this?
Originally posted by lovintha7
Hey Randy, I'll take the white FC or the yellow widebody off your hands. BTW, I took the motor I bought from you to the track today, ran a 15.829
Ran exellent
Hey Randy, I'll take the white FC or the yellow widebody off your hands. BTW, I took the motor I bought from you to the track today, ran a 15.829
Ran exellent
... you're a newbie here!I got dibs on the yellow Widebody
since 1998 
-Rich
Randy's widebody is sweet ain't it? I have an extra GSLSE here that has no original value. I am thinking about one of those kits. I have one picked out. It will be a little while, but...
I have a widebody Mustang so I need a widebody RX7 to go along with it.
No time soon I guess
I have a widebody Mustang so I need a widebody RX7 to go along with it.
No time soon I guess
As I sift thru my vast Rotary inventory
... I've come to realize "Hey I have one of those!!!"
If anyone is interested I have a Mariah Mode1 Widebody Rx7 (same as Randy's) rolling chasis, if anyone is interested.
-Rich
... I've come to realize "Hey I have one of those!!!" If anyone is interested I have a Mariah Mode1 Widebody Rx7 (same as Randy's) rolling chasis, if anyone is interested.
-Rich
Last edited by RichRotorhead; Jul 3, 2004 at 05:50 PM.
Originally posted by RichRotorhead
As I sift thru my vast Rotary inventory
... I've come to realize "Hey I have one of those!!!"
If anyone is interested I have a Mariah Mode1 Widebody Rx7 (same as Randy's) rolling chasis, if anyone is interested.
-Rich
As I sift thru my vast Rotary inventory
... I've come to realize "Hey I have one of those!!!" If anyone is interested I have a Mariah Mode1 Widebody Rx7 (same as Randy's) rolling chasis, if anyone is interested.
-Rich
I thought you had sold it a little while back...
I thought so too, but the buyer has gone AWOL
As far as a trade is concerned... tempting, but I need to downsize my Rotary Empire (...man I thought I would never get to use that word
)
-Rich
As far as a trade is concerned... tempting, but I need to downsize my Rotary Empire (...man I thought I would never get to use that word
)-Rich
Last edited by RichRotorhead; Jul 4, 2004 at 12:47 AM.



