666cody666

So i bought my microtech lt10 yesterday and the guy had wired it all up with all the connecters minus the coil and fuel pump ones.He told me what to do with the pump so thats fine. with the coils what i dont under stand is how they ground. I see on the leading coil there is a black wire coming out from it is that a ground? Now from the trailing i see no black wire, so is the case the ground? i was wondering if i can use the FB coils wiring as a sorce of power. it would go like this:

(+)BW to tan leading
(+)BW to tanX2 trailing
Yellow from trailing to FB tach wire (YG)
Would that work or do i have to do something different?

Second would be the S5 TPS)he had it wired for S4 tps on S5 turbo) now the diagram shows that for both S4 & S5 it should go like this right?

Orange to blue
green/red to grey
black/red to brown

but only one TPS has the Orange, green/red, black/red. the other one has yellow,red, blue. how do i hook all this up?

Thanks

rx72c

iTrader: (8)

They ground via the bracket. If you dont bolt them down they dont ground.

With the s5 tps. you only connect the narrow band tps. dont worry about the other one so follow the colours from the microtech diagram.


LEADING COIL PACKS
TAN 12V IGNITION
PINK GREY/BLUE MICROTECH


TRAILING COIL PACKS
TAN 12V IGNITION
TAN 12V IGNITION
PINK GREY/RED MICROTECH
WHITE GREY/BLACK MICROTECH
YELLOW TACHO OUTPUT
GREY WIRE leave it disconnected.

666cody666

What about the FB wiring can i use its 12V+ Black/white wire? one for leading one trailing or do i have to make something up?

rx72c

iTrader: (8)

you can use the black/white wire.