Using S5 coils in FB, Plus Tps hook up
So i bought my microtech lt10 yesterday and the guy had wired it all up with all the connecters minus the coil and fuel pump ones.He told me what to do with the pump so thats fine. with the coils what i dont under stand is how they ground. I see on the leading coil there is a black wire coming out from it is that a ground? Now from the trailing i see no black wire, so is the case the ground? i was wondering if i can use the FB coils wiring as a sorce of power. it would go like this:
(+)BW to tan leading (+)BW to tanX2 trailing Yellow from trailing to FB tach wire (YG) Would that work or do i have to do something different? Second would be the S5 TPS)he had it wired for S4 tps on S5 turbo) now the diagram shows that for both S4 & S5 it should go like this right? Orange to blue green/red to grey black/red to brown but only one TPS has the Orange, green/red, black/red. the other one has yellow,red, blue. how do i hook all this up? Thanks |
They ground via the bracket. If you dont bolt them down they dont ground.
With the s5 tps. you only connect the narrow band tps. dont worry about the other one so follow the colours from the microtech diagram. LEADING COIL PACKS TAN 12V IGNITION PINK GREY/BLUE MICROTECH TRAILING COIL PACKS TAN 12V IGNITION TAN 12V IGNITION PINK GREY/RED MICROTECH WHITE GREY/BLACK MICROTECH YELLOW TACHO OUTPUT GREY WIRE leave it disconnected. |
What about the FB wiring can i use its 12V+ Black/white wire? one for leading one trailing or do i have to make something up?
|
you can use the black/white wire.
|
All times are GMT -5. The time now is 10:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands