Microtech Area is for discussing Microtech systems

Microtech spark dropping out

Thread Tools
 
Search this Thread
 
Old Apr 18, 2009 | 06:14 PM
  #1  
mattmarrx3's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 115
Likes: 0
From: nz
spark dropping out

got the car going and every now and again it drops to run on 1 rota there is power at both ternimals on the coils but no spark on both leads just on the rear rota it has new plugs and leads in it that are only a few hours old from starting it up and burning clean

checked every thing no errors comming up but when i did have the pink wire on the leading coil (hec 715) of the rear rota and it did it it would say rpm error and then it would clear its self for some reason and be fine

thought it was the injector at first but they are new and all working
Reply
Old Apr 19, 2009 | 12:41 AM
  #2  
rx72c's Avatar
Rotary Freak
Tenured Member: 20 Years
Top Answer: 1
iTrader: (8)
 
Joined: Jun 2003
Posts: 2,878
Likes: 195
From: Australia
Check the earth on your x4 box.
Its either not on your block or its loose or its a **** connection.

Or the ground in the car is crap. Or you have faulty spark plugs.
Reply
Old Apr 19, 2009 | 01:48 AM
  #3  
mattmarrx3's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 115
Likes: 0
From: nz
yep put some old plugs in it from the bat and it started mint and reved clean think ill get some 10 egv and take some more fuel out

cheers rx72c
Reply
Old Apr 19, 2009 | 02:29 AM
  #4  
rx72c's Avatar
Rotary Freak
Tenured Member: 20 Years
Top Answer: 1
iTrader: (8)
 
Joined: Jun 2003
Posts: 2,878
Likes: 195
From: Australia
wouldnt be the first time ive seen dud plugs.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
whinin
General Rotary Tech Support
1
Sep 23, 2015 04:09 PM
tctwaites
1st Generation Specific (1979-1985)
5
Sep 22, 2015 08:48 PM
Captain Hook
2nd Generation Specific (1986-1992)
8
Sep 22, 2015 01:12 PM
Mps_hell
Adaptronic Engine Mgmt - AUS
3
Sep 19, 2015 10:02 PM




All times are GMT -5. The time now is 04:41 AM.