mazdamigastos

iTrader: (6)

I have the grey/blue connected into pink leading coil pack. grey/red to pink trailing coil pack and grey/black to white trailing coil pack, all 3 wires are connected to coil harness side.

I have cas connected to following:

Factory=Microtech

red =red
green=green
white/black=yellow
white=yellow

Now on the Tps side:

haltech tps=microtech

orange=blue
white=grey
black=brown

Fuel relay

87 direct power to battery
86 to pink
85 to green
30 to fuel pump

When I turn my ignition to on position, only green led comes on, both orange and red led are off, whenever I step on the gas when the ignition is on, the orange led blinks or depressing halfway stay on.

mazdamigastos

iTrader: (6)

ok, I figured it out the cas was wired up wrong, the wiring did not match the cas wiring side.