Can I control a Efan with my LTX 8?

 

Yes you can.

you need to run it through a relay.

Get your self a 30 amp relay and it will have 4 pins on it

87, 86, 85, 30.

You need direct power from battery(any live +12v source ) to go to 87
You need +12v ignition to go to 86
The white wire from the microtech to go to 85.
30 goes to the fan positive of the fan.

You then get your handset. go to AUX_FAN_ON and set a temperature for the fan to switch on.

 

Thanks for the help. I had the relay setup that way but I didn't notice the Aux_fan setting. I thought I was going to have the fan running all the time. Thanks again!!!!!

 

no worries