Microtech Looki MT WideBand :)
Thread Starter
Laying Down Rotary Law
Joined: Mar 2001
Posts: 2,075
Likes: 1
From: central florida
Looki MT WideBand :)
I got the car running again after taking the turbo and manifold off for some ceramic coating
MY AFR's at WOT in most gears
was in the 11.9's
My IDLE AFR is 11.1-11.3
Pretty bad *** WideBand!
MY AFR's at WOT in most gears
was in the 11.9's
My IDLE AFR is 11.1-11.3
Pretty bad *** WideBand!
Last edited by kabooski; Nov 22, 2003 at 09:59 PM.
what 7
Joined: Feb 2002
Posts: 670
Likes: 1
From: Portage, MI
I take it those LEDs on the right signify rich, stoich and lean?
That seems VERY useful; something I wish my Tech Edge (1.5) had. I was planning on taking some markers and going over certain bars (it has a bar scale next to the #) so I wouldn't have to look directly at it while driving. Just like gauges with warnings LEDs to catch your eye, I'm glad someone put it on a wideband, it seems like a no-brainer.
Only thing is, I think it is priced out of the market.
That seems VERY useful; something I wish my Tech Edge (1.5) had. I was planning on taking some markers and going over certain bars (it has a bar scale next to the #) so I wouldn't have to look directly at it while driving. Just like gauges with warnings LEDs to catch your eye, I'm glad someone put it on a wideband, it seems like a no-brainer.
Only thing is, I think it is priced out of the market.
Thread Starter
Laying Down Rotary Law
Joined: Mar 2001
Posts: 2,075
Likes: 1
From: central florida
yep big bucks now with the current exchange rates
man I remember when it was 1.9 AUD to 1 USD
couple of years ago
I think my crusing AFR's are in the 14's
I get real good MPG for the mods I have
man I remember when it was 1.9 AUD to 1 USD
couple of years ago
I think my crusing AFR's are in the 14's
I get real good MPG for the mods I have
Last edited by kabooski; Nov 23, 2003 at 04:14 PM.
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,353
Likes: 9
From: Sydney, Australia
Kabooski
nice eh? i got one of them as well! worth there weight in gold! how much boost are you on??
dont worry about mixtures at idle, you will never get a mazda to idle at 14:1!
Pirana,
the leds are for the selector switch ie petrol, alky, LPG
Dale
nice eh? i got one of them as well! worth there weight in gold! how much boost are you on??
dont worry about mixtures at idle, you will never get a mazda to idle at 14:1!
Pirana,
the leds are for the selector switch ie petrol, alky, LPG
Dale
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,353
Likes: 9
From: Sydney, Australia
Kabooski
another thing,
only use the tail pipe with it, dont mount the sensor in the dump pipe! it will get too hot and not read accurate,
also you will only get good mixture readings in 3rd and 4th gear, other gears just rev to quick to get anything happening
Dale
another thing,
only use the tail pipe with it, dont mount the sensor in the dump pipe! it will get too hot and not read accurate,
also you will only get good mixture readings in 3rd and 4th gear, other gears just rev to quick to get anything happening
Dale
Trending Topics
Thread Starter
Laying Down Rotary Law
Joined: Mar 2001
Posts: 2,075
Likes: 1
From: central florida
My Tail pipe gets pretty HOT
is started to melt the paint on the probe pipe lol
I'm running 14 pounds sometimes spiking to 16 pounds on the top of 3RD and 4RTH gears
is started to melt the paint on the probe pipe lol
I'm running 14 pounds sometimes spiking to 16 pounds on the top of 3RD and 4RTH gears
Thread
Thread Starter
Forum
Replies
Last Post