Microtech Driveability Issues with Microtech?
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Baltimore
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Driveability Issues with Microtech?
I'm about to purchase a microtech unit. What sort of driveability issues show up and how do you go about fixing them?
A friend has an electromotive unit which required about a year's worth of back yard tuning to get it where he likes it. I know microtech gives you a base map based on your setup, but how good is it? How long should I expect to have to work on this?
A friend has an electromotive unit which required about a year's worth of back yard tuning to get it where he likes it. I know microtech gives you a base map based on your setup, but how good is it? How long should I expect to have to work on this?
#2
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Baltimore
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Also, if using a wideband O2 and datalogging are a fundamental part of tuning (and fixing driveability issues), why would anyone purchase an LTX8 over and LTX12?
#3
Rotary Enthusiast
as long as the tune is good you wont have any drivability issues, you can put 1600cc primarys in and you wont have a problem, you just got my mates car running with 2x1000 and 2x1600 PRIMARY injectors 4x1600cc secondarys and 2x1600cc aux injectors running off a LTx12s and it idles perfecly and drives like a treat
for wide band data logging you need a LT10s or LT12s,
Dale
for wide band data logging you need a LT10s or LT12s,
Dale
#6
Rotary Mechanic
i just bought a lt-10,i havent isntalled it fully yet.im running 4 1600cc injectors. will the car start and idle with those since it was factory set for the stock injectors?
Trending Topics
#8
583 rwhp 1st gen
iTrader: (1)
Join Date: Jul 2004
Location: texas
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by puntorotary
i just bought a lt-10,i havent isntalled it fully yet.im running 4 1600cc injectors. will the car start and idle with those since it was factory set for the stock injectors?
#10
Rotary Mechanic
Originally Posted by 1sgen
by the way my car is the same as yours and its also the same color , what engine ,turbo combo do you have and what hp are you running?
#12
Rotary Enthusiast
no it dosent,
you can hook the microtech wide band controller up to it for logging and displaying AFR on handset or laptop, this is a $600au option which includes the LSU4 sensor, wiring looms, LSU controller box etc, but no display, the display can be purchased at a later date and plugged in
Dale
you can hook the microtech wide band controller up to it for logging and displaying AFR on handset or laptop, this is a $600au option which includes the LSU4 sensor, wiring looms, LSU controller box etc, but no display, the display can be purchased at a later date and plugged in
Dale
#13
Rotary Powered Boobies
iTrader: (1)
Join Date: Oct 2001
Location: Miami Beach
Posts: 2,530
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Crusader_9x
Can you gointo moredetail on the lt10s wideband datalogging? I wasnt aware that it did that.
Will it datalog the signal from my plx m500?
Will it datalog the signal from my plx m500?
Last edited by luiml73; 03-14-06 at 05:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM