Microtech Coolant temp sensor
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Michigan
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Coolant temp sensor
I have a s5 turbo motor, and a lt10s. Where is the coolant temp sensor im supposed to hook up to. Is it the sensor on the side of the block or on the water fill neck? any help would be great, thanks.
#6
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Michigan
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
i have the diagram the site shows, but its a little veg. Do i just hook the ign. switches to the nearest wire or does it go somewere specific? and where exactly do the aux wires go? any help would be great! thank you
#7
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The AUX wires only go somewhere if you are using them.
To get your IGN 12V, I generally use the black/yellow wire at the trailing coil. But you can go directly to the ignition switch if you want.
To get your IGN 12V, I generally use the black/yellow wire at the trailing coil. But you can go directly to the ignition switch if you want.