diku

Hi Guys,

Does anyone have the base map for my setup. Microtech MT-8, TO4E, additional 4 injectors(VR4 type), mild ported series 4, hurley 2mm race seals, ebc, 3" downpipe with split dual trust exhaust. My car is really slow now due to th leaking external wastegate( 10psi max). But I'm afraid the tuning is also out. Can anyone advise.

Thanks,
Seven

chris_stampe

Im sure someone has a map they could share with me 550 stock primaries and 1600cc secondaries at stock fuel pressure. Please PM me. Sorry to ***** your thread.

Crusader_9x

you cant send maps with microtechs all you can do is send screen shots or write down what the settings are. nless you got one of the new s series, i hear they are suppose to be able to send maps to one another.

chris_stampe

Ok, so would it be too crude to just say that 550x3 is about 1600, so divide the secondary duty cycle by 3 to get a base map for my setup from the stock map? It will be about a month before i get it on a dyno.

chris_stampe

How the hell can you crudely tune it for 1600 secondaries? I need it to at least run when the secondaries come on so that it can be dyno tuned.

johnopaul

u should be able to drive the car on the base map, since ur secondarys wont come in to play if take it easy.

my car has 2 x 720's and 2 x 1680cc so i could help u a little with some rough numbers

chris_stampe

if you could post your basic load map or matrix table Im sure it could help out a lot of people.

johnopaul

chris i sent u some values