Microtech 400+ hp Microtech Club - Whos In It?
08-01-04, 09:07 PM
#26
Newbie
Join Date: Aug 2003
Location: Ballarat, Australia
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys, i did it easy with only 12psi, made 411rwhp.
Only catch is its not in a rx7, its in a 626.
Dave
p.s. forgot to tell you what specs, lol
20b, with ta51, 3x550cc + 3x1700cc, ltx12, custom plenum, not sure on port job but it has been, tuned by Chris Dalton, Dalton Automotive.
ONly running 12psi, due to drivetrain limitations!
Only catch is its not in a rx7, its in a 626.
Dave
p.s. forgot to tell you what specs, lol
20b, with ta51, 3x550cc + 3x1700cc, ltx12, custom plenum, not sure on port job but it has been, tuned by Chris Dalton, Dalton Automotive.
ONly running 12psi, due to drivetrain limitations!
Last edited by Aussie_20B; 08-01-04 at 09:11 PM.
08-02-04, 06:57 AM
#27
Junior Member
Join Date: May 2004
Location: gold coast australia
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
i have made with ltx12 microtech 628hp @`wheels on 19psi with 20b extend port /dowelled engine ta45 turbo.....have run a best of 9.70@146mph......looking forward to going quicker soon.....and it drives like an stock 12a engine.....doesnt miss a beat and regulary street driven around every weekend.....so engine hp would be up too about 850hp i reckon.....cheers......microtech is easily the best rotary computer hands down and is proven so often in oz....you guys will catch on soon and never look back....cheers
08-09-04, 12:44 PM
#28
Senior Member
iTrader: (1)
Join Date: Sep 2001
Location: San Francisco
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
just squeezed in
Just dynoed last Friday at 402 at the wheels, at an easy .9 Bar, a very safe 10.x:1 AFR in 80 degree weather. I actually made 390 with more power after the peak (from 7800 to 8500) at .8 Bar with high 11 to 1 AFR ratio. So the engine definitely makes the most power at close to 12:1, but it's good to have a little safety margin.
I will try to post dyno sheet once I have a chance to scan it in. BTW, my FD gets better mileage than stock, just as drivable, with working AC, full boost in 5th at 3200 rpm (T04S). So, I'm pretty happy that after all these years, I finally have the near perfect street machine.
Fred
94 single turbo FD
I will try to post dyno sheet once I have a chance to scan it in. BTW, my FD gets better mileage than stock, just as drivable, with working AC, full boost in 5th at 3200 rpm (T04S). So, I'm pretty happy that after all these years, I finally have the near perfect street machine.
Fred
94 single turbo FD
08-12-04, 11:21 PM
#29
583 rwhp 1st gen
iTrader: (1)
Join Date: Jul 2004
Location: texas
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
ltx8 t2 engine in 1st gen
372 rwhp at 9 psi
332 ftlbs torque
to4 e 60-1
injction perfection IDA throttle body
pump gas 93 octane
going 3rd gen engine with t72 in a 1stgen
will keep you updated
372 rwhp at 9 psi
332 ftlbs torque
to4 e 60-1
injction perfection IDA throttle body
pump gas 93 octane
going 3rd gen engine with t72 in a 1stgen
will keep you updated
08-13-04, 02:49 AM
#30
Driveline Killer
Join Date: Jul 2004
Location: OC the wicked 714
Posts: 1,463
Likes: 0
Received 0 Likes
on
0 Posts
ok huys, it seems everyone in here has more experience right now with the hands on side of playing with the bigger power on a turbo rotary than I do So I got some questions. An engine builder that I know personally will be assisting me with a build up sometimethis year when I have all the money together, This is the setup we will be running on my S4 TurboII. It will consist of a microtech LT8, a T-60-1 turbonetics turbo, 850cc primaries, 1600cc secondaries, stock ignition coils, walbro fuel pump, larger fuel lines, machined out bore on the fuel rails, Malpasi fuel pressure regulator, and various other non power associated things like racegate and BOV. The port he will be using is top secret so I won't know what it is until it's done and I can see it. I guess its to be a suprise. He has used this setup on many cars in the past couple of years with great results, I'm told, and is to be able to yield somewhere in the area of 450rwhp. He lives pretty far so I have'nt been able to take a loook at a dyno sheet yet but I have driven one of the cars he built with this setup. At about 2200rpm in 4th gear the tires broke loose and started spinning when I went W.O.T. Does this number on the hp sound right, I don't know what 400+hp on a 2nd gen would feel like so I couldn't say that it felt like a 400hp beast from experience. It did pin me to the seat though. Anyone ever hear of such horsepower from this kind of setup. Oh I forgot the most important detail, the boost level, it will be tuned to about 10psi and supposedly getting this power of over 400horse. It sounds exciting but I don't want to build it and not have them come. Let me know what you guys think. Thanx
08-17-04, 09:09 PM
#31
Junior Member
Join Date: Apr 2003
Location: SD, California
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
456 hp 3rd gen
Jon came out here and tuned my 93 7. It has a t72-t68 Tubonetics ball bearing turbo fitted with a custom stainless manifold. The motor was built by speedmachine racing in San Diego (Escondido) CA and has hi comp snap ringed rotors with stock 2mm seals, stage two stationary gears, aggressive street port and the whole motor was cryo treated. Stock throttle bodie and intake manifold (due to SCCA regulations). The motor also has a 49mm inlet restrictor fitted on it (all of the intake has to pass through this tiny restrictor that is 4 inches away from the turbo. And the exhaust meets the 93 DB limit at 50 feet (SCCA regulation), 97 DB is the limit for a street car in CA. With all of this we were extremely happy when the car put down 456 hp and 390 torque to the wheels on a Dyno Dynamics dyno. The Dyno Dynamics reads lower than a Dyno Jet (we are guessing it would put down 470-480 on a Dyno Jet). When it was dynoed we had the 12" slicks on the back along with .5" of toe in (with the toe set a zero and less sticky narrow street tires we would guess the power to be around 15-20 more at the wheels). And the answer you were all waiting for-------- 14.1 pounds of boost, we had it peak at 16 pounds but that was around 5000 rpm. Jon is the man!!!!!! And I love my Microtech, I threw my piece of **** Electromotive TEC3 in the trash!!!!!!
01-31-05, 09:29 PM
#33
Laying Down Rotary Law
Hi Tony 
To add my self here
Made 479 @ 15 PSI
Made 520 RWHP - 415 TQ on a Dynojet
@ 19 PSI ...spiking to 20
S4 Block
LTX-8
Tuned By Rotary and MicroTech Guru Gaby of Sporty Auto Racing
To add my self here
Made 479 @ 15 PSI
Made 520 RWHP - 415 TQ on a Dynojet
@ 19 PSI ...spiking to 20
S4 Block
LTX-8
Tuned By Rotary and MicroTech Guru Gaby of Sporty Auto Racing
Last edited by kabooski; 01-31-05 at 09:52 PM.
02-02-05, 05:29 PM
#35
Full Member
Join Date: Feb 2005
Location: miami,florida
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
85 GSL-SE 6 port,60-1,38mm tial wg,hks super seq blowoff,msd 6al,msd blaster coils,850cfm front mount intercooler,tsunami fuel pump,3in ex.downpipe to back ,fuel presure reg,720cc prim.injectors and 1600cc secs,LTX8 microtech standalone,port and polish streetport ,rb pulleys,t2 trans and ford 9in rearend strang axles and pinion.some other secerts.dyno tested at lopez racing 447whp @16lbs boost
03-12-05, 01:48 PM
#39
seven-less
Join Date: Apr 2003
Location: city of houston.... y0!
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
i should get there soon.
ditched the hybrid and just bought a to4e .60 with a .96AR...
lt8s
S5 block
no emissions
npr front mount
greddy manifold
tial 38mm
no AC/PS
plx m300
hoping for 400rwhp.
ditched the hybrid and just bought a to4e .60 with a .96AR...
lt8s
S5 block
no emissions
npr front mount
greddy manifold
tial 38mm
no AC/PS
plx m300
hoping for 400rwhp.
03-23-05, 12:01 AM
#40
Senior Member
Join Date: Apr 2003
Location: Ft. Lauderdale
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, im having a 3rd gen Microtech car being tuned on Monday. Large SP, pinned, custom Davinci 76mm .96 p trim turbo,Davinci ex. mani, Davinci 3.5 inch SS full exhuast, Davinci Meoh inj kit, Aeromotive fuel system/ Keiths pri/ sec rails,blah, blah, blah. Anyways, Rolo is tuning it on Monday. It has the LT10s, bosch coils, 3bar, and the plug n play harness. We are doing a 12/15/25 psi tunes. Shooting for ~600 at 25psi. Results coming soon....
Last edited by RageRace; 03-23-05 at 12:04 AM.
04-04-05, 11:40 PM
#41
583 rwhp 1st gen
iTrader: (1)
Join Date: Jul 2004
Location: texas
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
dynoed my car on thursday
running 12 psi boost and running out of injectors "leaning out " prevented me from revving it to 8000 rpm like usuall and the result was 427.4 rwhp and 356.2 ftlbs of torque.
going for 1600 cc injectors and back to the dyno to see the end result with 14 psi!!!!!!!!!
will keep you posted
1984 fb
fd block street ported
injection perfection ida throttle body
garrett t 72
550 cc pri 1000 cc sec
pump gas 93 octane
microtech ltx8
custom intercooler
running 12 psi boost and running out of injectors "leaning out " prevented me from revving it to 8000 rpm like usuall and the result was 427.4 rwhp and 356.2 ftlbs of torque.
going for 1600 cc injectors and back to the dyno to see the end result with 14 psi!!!!!!!!!
will keep you posted
1984 fb
fd block street ported
injection perfection ida throttle body
garrett t 72
550 cc pri 1000 cc sec
pump gas 93 octane
microtech ltx8
custom intercooler
05-08-05, 12:16 AM
#46
583 rwhp 1st gen
iTrader: (1)
Join Date: Jul 2004
Location: texas
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
dynoed the car today after solving the issues with the 1600cc sec and the staging,
boost controller supposed to hold the boost at 15 psi, got there only for a split sec and then dropped down to 13 and then to 11psi.
anyway peak rwhp was at 443 and torque was 376 ftlbs.
beside getting another boost controller iam happy with the way it turned out and i think thats all what the first gen is getting. now i have to finish my 20b 3rd gen with ltx12s microtech.
we'll keep you posted.
by the way the car was mainly tuned by george "onefastrx7" and me
boost controller supposed to hold the boost at 15 psi, got there only for a split sec and then dropped down to 13 and then to 11psi.
anyway peak rwhp was at 443 and torque was 376 ftlbs.
beside getting another boost controller iam happy with the way it turned out and i think thats all what the first gen is getting. now i have to finish my 20b 3rd gen with ltx12s microtech.
we'll keep you posted.
by the way the car was mainly tuned by george "onefastrx7" and me
07-21-05, 11:07 AM
#50
Rick James
Join Date: Sep 2002
Location: Under The Hood In FL
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HIMNI Racing
I don't want to post under somone that made 480 but..
I made 300 at 12 psi....ran out of fuel = (
LT8
street ported S5 TII
T04B
2- 720's 2-860's
and all the other junk.
I'm dropping in a pair of 1600's right now and going to try and squeeze 390-400 out of the to4b before I go 60-1 hi-fi. That should push it to about 18-20 psi before the t04b falls flate = )
Oh yeah, I drive the car every day.
I made 300 at 12 psi....ran out of fuel = (
LT8
street ported S5 TII
T04B
2- 720's 2-860's
and all the other junk.
I'm dropping in a pair of 1600's right now and going to try and squeeze 390-400 out of the to4b before I go 60-1 hi-fi. That should push it to about 18-20 psi before the t04b falls flate = )
Oh yeah, I drive the car every day.