Megasquirt No spark 2.1.1 please help
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: Mesa AZ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
No spark 2.1.1 please help
I have tryed all i can think of. I have RPM, sync, inj, and is seeing cranking but no spark im cranking the car with timing light connected. I also only have the center LED blinking when cranking? much of the build and settings are from Aaron build sheet thanks for that also. I cant think what else to try any help would be apreciated.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Do you have rotary mode turned on? At least with the MS1, the leading fires only on cranking. Not sure about the MS2.
Also, are your resistors on the correct side of the LEDS?
Also, are your resistors on the correct side of the LEDS?
#3
Junior Member
Thread Starter
Join Date: May 2009
Location: Mesa AZ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I finally got it going. Thanks for the help. Im not to sure now i went over all the settings a ton of times and even reflashed the 2.1.1. but its running now so on to tuneing thanks again
#4
MegaSquirt Mod
Ken
Thread
Thread Starter
Forum
Replies
Last Post