Megasquirt DO NOT USE 029d FIRMWARE
#1
MegaSquirt Mod
Thread Starter
DO NOT USE 029d FIRMWARE
Do not use 029d firmware. A problem has been discovered where in some situations the spark table can become corrupted... I will post in the firmware thread when the next usable version is out.
#2
MegaSquirt Mod
Thread Starter
It turns out that the bug isn't in the firmware, megatune is corrupting the tables. All of the newer version of megatune have this problem... I have not had this problem with the older beta 6xx versions however, so I'd recommend for now sticking with 026i_mod and one of the 2.25b6xx versions of megatune. I'll post here when these problems are resolved, and post the latest tested firmware.
#4
MegaSquirt Mod
Thread Starter
there are newer versions you can try, however, 029d is the latest I've tried.
Feel free to try a newer version.... I don't think anything major has changed, and I think there are fixes for the idle valve control.... As always, just be careful...
But yeah, I think the issue with table corruption and stuff has gone away as long as you get the latest megatune 2.25
Feel free to try a newer version.... I don't think anything major has changed, and I think there are fixes for the idle valve control.... As always, just be careful...
But yeah, I think the issue with table corruption and stuff has gone away as long as you get the latest megatune 2.25
#5
MegaSquirt Mod
Thread Starter
on second thought, hold off on the 029 series of code... there are still potential problems. 026i_mod should get you by (The only one of my features missing from that code is the 2 parameter staged injection).
Thread
Thread Starter
Forum
Replies
Last Post