Link Ci-PEC link g4 rx fuel map
#1
Junior Member
Thread Starter
link g4 rx fuel map
ive just finished wiring in the link g4 rx in my s7 and am wondering if any one has played round with the software enuff to help with a map that will actually get the car running enuff to get up to temp so i can check for leaks and make sure the fans are wired up we got as far as configureing it and was guna have a go at seting a table to make it run but thought id ask on here before i try any help would be much apreciated as the tuners here get really pissed if somethings not working when it goes on dyno that and the fact im the only one in my town that has a link g4 rx in a rx7
#2
ive just finished wiring in the link g4 rx in my s7 and am wondering if any one has played round with the software enuff to help with a map that will actually get the car running enuff to get up to temp so i can check for leaks and make sure the fans are wired up we got as far as configureing it and was guna have a go at seting a table to make it run but thought id ask on here before i try any help would be much apreciated as the tuners here get really pissed if somethings not working when it goes on dyno that and the fact im the only one in my town that has a link g4 rx in a rx7
#5
Junior Member
Thread Starter
cheers i have base map map off link web site but as soon as u try start it it floods
im runing
bws400 series turbo
850/1600cc injectors
factory fuel pump feeding the surge tank and bosch o44 feeding motor
but will have a play round and see what i can do realy wish i didnt go for the link ecu doesnt seem to be alot of help from tuners in new zealand unless u want to pay couple hundy an hour for there help
im runing
bws400 series turbo
850/1600cc injectors
factory fuel pump feeding the surge tank and bosch o44 feeding motor
but will have a play round and see what i can do realy wish i didnt go for the link ecu doesnt seem to be alot of help from tuners in new zealand unless u want to pay couple hundy an hour for there help
#6
Will u do me a kindness?
iTrader: (2)
cheers i have base map map off link web site but as soon as u try start it it floods
im runing
bws400 series turbo
850/1600cc injectors
factory fuel pump feeding the surge tank and bosch o44 feeding motor
but will have a play round and see what i can do realy wish i didnt go for the link ecu doesnt seem to be alot of help from tuners in new zealand unless u want to pay couple hundy an hour for there help
im runing
bws400 series turbo
850/1600cc injectors
factory fuel pump feeding the surge tank and bosch o44 feeding motor
but will have a play round and see what i can do realy wish i didnt go for the link ecu doesnt seem to be alot of help from tuners in new zealand unless u want to pay couple hundy an hour for there help
#7
cheers i have base map map off link web site but as soon as u try start it it floods
im runing
bws400 series turbo
850/1600cc injectors
factory fuel pump feeding the surge tank and bosch o44 feeding motor
but will have a play round and see what i can do realy wish i didnt go for the link ecu doesnt seem to be alot of help from tuners in new zealand unless u want to pay couple hundy an hour for there help
im runing
bws400 series turbo
850/1600cc injectors
factory fuel pump feeding the surge tank and bosch o44 feeding motor
but will have a play round and see what i can do realy wish i didnt go for the link ecu doesnt seem to be alot of help from tuners in new zealand unless u want to pay couple hundy an hour for there help
Trending Topics
#9
Junior Member
Thread Starter
cheers will do i have been haven trouble with laptop conecting to ecu laptop to old so got another one and trying top get wireing tables off my mate that wired it in
#16
Racing Rotary Since 1983
iTrader: (6)
'glad to see there are some additional smart peeps on the board...
i am thinking that there may be some changes coming. great products eventually rise to the top. if you get my drift.
howard
i am thinking that there may be some changes coming. great products eventually rise to the top. if you get my drift.
howard
#18
Junior Member
Thread Starter
I will post up my map once I get it in and going so ppl have a decent starting place. The factory basemaps are horrible
#20
Full Member
Join Date: Jul 2005
Location: The Netherlands
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
almost done here with the installation of a Link G4 RX
before this was my setup
- power fc
- twin power
- FJO peak and hold driver
- avc-r boost controller
- stock coils
- 1680 and 850 injectors
new setup
- Link G4 RX
- LS coils
- 1100 and 2200cc injectors Bosch Motorsport
GT35R on E85
It was running for a few years now... but last dyno session electronics got to warm from heat soak... one spark plug did not work for a while.
Time to change the complete system
we have worked with Link ECU for a while now on Nissan Skylines.
before this was my setup
- power fc
- twin power
- FJO peak and hold driver
- avc-r boost controller
- stock coils
- 1680 and 850 injectors
new setup
- Link G4 RX
- LS coils
- 1100 and 2200cc injectors Bosch Motorsport
GT35R on E85
It was running for a few years now... but last dyno session electronics got to warm from heat soak... one spark plug did not work for a while.
Time to change the complete system
we have worked with Link ECU for a while now on Nissan Skylines.
#21
Racing Rotary Since 1983
iTrader: (6)
i just finalized my Link Xtreme purchase. i believe i will have it a week from monday. i also have ordered the Display Link.
i will shortly be lobbying for a Link Section.
howard
i will shortly be lobbying for a Link Section.
howard
#22
Junior Member
Thread Starter
very nice it will be good to see some decent maps for a starting point
all ive got to do if figure out why my tps not working then ill be able to start
with tuneing
all ive got to do if figure out why my tps not working then ill be able to start
with tuneing
#23
r074r'/ |\|00B
iTrader: (14)
Join Date: Jan 2002
Location: KC, KS
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
I've been really looking at this ecu for several months but the lack of other users input is holding me back. Are there are usa rotary shops supporting this ecu? A lot of features in the ecu that make it appealing (to me at least).