Introduce yourself New members post about yourself here...

Newbie with '79 in SC

Old Sep 20, 2012 | 06:32 PM
  #1  
SB79RX7's Avatar
Thread Starter
Steve B
 
Joined: Sep 2012
Posts: 6
Likes: 0
From: Simpsonville, SC
Newbie with '79 in SC

Hello all,
Recently purchased a 1979 RX7 from the original owner. I believe is it about the 225th one imported to the US.
Currently struggling to figure out what set of wheels and tires to put on it. I'd like to keep it pretty stock.
Looking forward to the wealth of information and experience everyone has to offer.
Cheers
Attached Thumbnails Newbie with '79 in SC-photo2.jpg  

Last edited by misterstyx69; Sep 20, 2012 at 10:22 PM.
Reply
Old Sep 21, 2012 | 06:48 PM
  #2  
80seven's Avatar
Can Post Only in New Member Section
 
Joined: Sep 2012
Posts: 1
Likes: 0
Looks like the body is in great shape. I think the seats have been changed to a later model and the rear has been worked over for disk brakes? If so they would probably be off of an 85. the original came with either 13 x 5 inch steel wheels or 13 x 5.5 inch alloys. the standard tire was a 185HR13, not much tire.
Reply
Old Sep 22, 2012 | 12:03 AM
  #3  
rxtasy3's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Jun 2002
Posts: 9,580
Likes: 291
From: Spartanburg, SC
Originally Posted by SB79RX7
Hello all,
Recently purchased a 1979 RX7 from the original owner. I believe is it about the 225th one imported to the US.
Currently struggling to figure out what set of wheels and tires to put on it. I'd like to keep it pretty stock.
Looking forward to the wealth of information and experience everyone has to offer.
Cheers
welcome, very nice find on the SA. glad to see another 1st gen in sc. definitely has seats from an FB. there's only a couple manufacturers making wheels in the 4x110 pattern.

here's a link to the SE section of the forum. SE RX-7 Forum - RX7Club.com

Originally Posted by 80seven
Looks like the body is in great shape. I think the seats have been changed to a later model and the rear has been worked over for disk brakes? If so they would probably be off of an 85. the original came with either 13 x 5 inch steel wheels or 13 x 5.5 inch alloys. the standard tire was a 185HR13, not much tire.
welcome to u as well but u need to do an introduction per forum rules. as for the rear brakes, it's hard to tell in the pic but if it does have disc rear it could be from 81-85 gsl to keep the same lug pattern as the front.
Reply
Old Sep 22, 2012 | 08:50 AM
  #4  
xin9394's Avatar
Junior Member
 
Joined: Sep 2012
Posts: 9
Likes: 0
From: Boston
wow... very nice
Reply
Old Sep 22, 2012 | 11:35 AM
  #5  
SB79RX7's Avatar
Thread Starter
Steve B
 
Joined: Sep 2012
Posts: 6
Likes: 0
From: Simpsonville, SC
I put the seats in. It had an old Recaro and an old SE seat. Tried finding nice original but I couldn't...but if I find some I will change them out. Wasn't sure what year the rear brakes were from.
Thanks for the info.
Steve
Reply
Old Sep 22, 2012 | 11:41 AM
  #6  
SB79RX7's Avatar
Thread Starter
Steve B
 
Joined: Sep 2012
Posts: 6
Likes: 0
From: Simpsonville, SC
Almost forgot my formal intro. Sorry about that on the 1st go round. My name is Steve and I live in SC. I own a small commercial to industrial HVAC company. Looking forward to learning from the RX7 masters!
Reply
Old Sep 22, 2012 | 02:01 PM
  #7  
durtySC's Avatar
Junior Member
 
Joined: Sep 2012
Posts: 13
Likes: 0
From: Columbia, SC
Looks like a pretty nice garage you've got there too. Seems like a great place to work.
Reply
Old Sep 24, 2012 | 05:00 PM
  #8  
FBlife's Avatar
Full Member
 
Joined: Sep 2012
Posts: 127
Likes: 0
From: nowhere
pics of engine bay?
Reply
Old Sep 24, 2012 | 05:51 PM
  #9  
blackgunsalute's Avatar
Junior Member
 
Joined: Sep 2012
Posts: 9
Likes: 0
From: Dayton Ohio
sexy my friend!
Reply
Old Sep 24, 2012 | 10:06 PM
  #10  
ameri CAM's Avatar
Junior Member
iTrader: (1)
 
Joined: Sep 2012
Posts: 10
Likes: 0
From: Everett, Wa
Looks clean. She be a good candidate for a simple restore.
Reply
Old Sep 25, 2012 | 01:42 PM
  #11  
SB79RX7's Avatar
Thread Starter
Steve B
 
Joined: Sep 2012
Posts: 6
Likes: 0
From: Simpsonville, SC
SC

Thanks for the compliments.
Garage is nice, well lit (makes a huge difference) but of course...too small.
It should be nice "driver" restoration and bring back some memories.
I'll post some pics in a couple days.
Reply
Old Sep 25, 2012 | 04:28 PM
  #12  
red94yj's Avatar
Full Member
 
Joined: Feb 2011
Posts: 58
Likes: 0
From: Alabama/England
Congrats on the very nice FB. Like the color!
I'm sure you will receive lots of comments on the car in the future.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
Moppet52
3rd Generation Specific (1993-2002)
5
Feb 4, 2002 02:14 PM
Daw Tse
2nd Generation Specific (1986-1992)
5
Nov 16, 2001 10:59 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:41 AM.