Newbie with '79 in SC
#1
Steve B
Thread Starter
Join Date: Sep 2012
Location: Simpsonville, SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Newbie with '79 in SC
Hello all,
Recently purchased a 1979 RX7 from the original owner. I believe is it about the 225th one imported to the US.
Currently struggling to figure out what set of wheels and tires to put on it. I'd like to keep it pretty stock.
Looking forward to the wealth of information and experience everyone has to offer.
Cheers
Recently purchased a 1979 RX7 from the original owner. I believe is it about the 225th one imported to the US.
Currently struggling to figure out what set of wheels and tires to put on it. I'd like to keep it pretty stock.
Looking forward to the wealth of information and experience everyone has to offer.
Cheers
Last edited by misterstyx69; 09-20-12 at 10:22 PM.
#2
Can Post Only in New Member Section
Join Date: Sep 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Looks like the body is in great shape. I think the seats have been changed to a later model and the rear has been worked over for disk brakes? If so they would probably be off of an 85. the original came with either 13 x 5 inch steel wheels or 13 x 5.5 inch alloys. the standard tire was a 185HR13, not much tire.
#3
Moderator
iTrader: (2)
Hello all,
Recently purchased a 1979 RX7 from the original owner. I believe is it about the 225th one imported to the US.
Currently struggling to figure out what set of wheels and tires to put on it. I'd like to keep it pretty stock.
Looking forward to the wealth of information and experience everyone has to offer.
Cheers
Recently purchased a 1979 RX7 from the original owner. I believe is it about the 225th one imported to the US.
Currently struggling to figure out what set of wheels and tires to put on it. I'd like to keep it pretty stock.
Looking forward to the wealth of information and experience everyone has to offer.
Cheers
here's a link to the SE section of the forum. SE RX-7 Forum - RX7Club.com
Looks like the body is in great shape. I think the seats have been changed to a later model and the rear has been worked over for disk brakes? If so they would probably be off of an 85. the original came with either 13 x 5 inch steel wheels or 13 x 5.5 inch alloys. the standard tire was a 185HR13, not much tire.
#5
Steve B
Thread Starter
Join Date: Sep 2012
Location: Simpsonville, SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I put the seats in. It had an old Recaro and an old SE seat. Tried finding nice original but I couldn't...but if I find some I will change them out. Wasn't sure what year the rear brakes were from.
Thanks for the info.
Steve
Thanks for the info.
Steve
#6
Steve B
Thread Starter
Join Date: Sep 2012
Location: Simpsonville, SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Almost forgot my formal intro. Sorry about that on the 1st go round. My name is Steve and I live in SC. I own a small commercial to industrial HVAC company. Looking forward to learning from the RX7 masters!
Trending Topics
#11
Steve B
Thread Starter
Join Date: Sep 2012
Location: Simpsonville, SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the compliments.
Garage is nice, well lit (makes a huge difference) but of course...too small.
It should be nice "driver" restoration and bring back some memories.
I'll post some pics in a couple days.
Garage is nice, well lit (makes a huge difference) but of course...too small.
It should be nice "driver" restoration and bring back some memories.
I'll post some pics in a couple days.
Thread
Thread Starter
Forum
Replies
Last Post