After cutting the lines for the front bonnet a bit of sanding going on. All this front section has been made by hand


A bit of filling and sanding on the bonnet

Ok moved the Lambo/MR2 out of the unit for a clean up



Front section getting close to primer

Primed one coat

Underside of the bonnet primed

 

Drivers rear quater all sanded and pin holes filled


First coat of primer


All wet sanded

Second coat or primer

Bonnet pins on and gapping the bonnet

 

Two coat of primer on the door and five on the rear quater its coming along now

While the primer was drying i made this

Test Fitted


Primer coat three on the door

Front wing ready for primer

First coat or primer

 

Didnt get much done today as i dropped the roof scoop up to Dublin to get it carbon fibered

A few pin holes filled

My friend daughters car the laquer peeled off so a paint job was aquired


Re-primered

Bonnet first coat of primer

Getting there

Front bumper more crap fiberglass a good bit of work here

 

A bit of sanding going on

Bonnet all wet sanded and sprayed black

Finished

Second coat of primer

Front bumper and passenger side first coat of primer


Primer drying

Front section all masked yp and sprayed black

 

Wow, amazing!

 

Put the bonnet back on to stop any dust getting on the black paint job

A few pin holes to fill

A bit of sanding on the passenger side

Pin holes all rubbed down

Second coat of primer

 

Gorgeous looking kit car.

 

Very impressive! Subscribed!

 

Pretty neat ...

 

Amazing amount of work and effort here - however do you find the time!

 

Cheers guys not enough hours in the day

Havent been doing much as i have the flu :-)

The wing mirror on



Lots of sanding going on as im waiting on primer to arrive



4 Cars in a tight squeeze

 

Lambo/Mr2 back in and sanding so i got the first coat of primer on the passenger side

 

Got stuck into the passenger side of this

Got the sticker on

Got the two grill inserts painted black

Sticker

Got the roof part painted this is where the roof scoop goes

More pin holes

Side indicators there LED's

Bolted the bonnet back on its hinges and put in the bonnet pins and grills



First coat of primer yee haa at last

 

Painted the drivers side side skirt


Getting closer to wrapping the car

The hardest part getting the lines

 

Had 50 odd led's left over from the rear lights as you could only purchase them in bunches of 50's so i am putting them into the roof

Passenger side being wired up

All three rows working

Interior shot of the led's working


Drivers side wired up and working

Interior shot

Second coat of primer

Third coat or primer


Looks like a bomb on the roof of the car :-) i have to raise the roof up 15mm so all the wires will be hidden

 

Thts some serious work mate good job!

 

@ nyek7 - Cheers :-)

Picked the roof scoop up today

The LED's all fiberglassed down

Second layer of fiberglass this layer will pin down the roof scoop

Loads of bumps looks like a gold course :-) these will be sorted


I used filler in the low spots to level the area out then sand this back then re-fiberglass the whole roof

 

Holy crap! That's an insane amount of bodywork...

 

Haha great looking kit car, I first thought what is that guy doing to the poor lambo when I saw that lol

 

First layer to cover the bumps

Bit of sanding going on

Nearly all flat ready fpr the second layer of fiberglass

The last skim of filler dont know if you can see from the picture the shape of the roof

Better view

 

Pulled the lambo replica out today for a clean up of the unit here it is beside the mr2





The roof section still fiberglassing and sanding

This section will direct air over and down toward the engine cover from the scoop

 

lots of sanding going on

Getting the dip in the roof right


The dip wher the air will travel

Front view

The roof esction built up with the roof scoop built into the roof

Getting the side section right

Getting there

Got the drivers mirror glass put in and set the right angel


The carbon fiber theme coming together

 

Got the roof fully sanded and primed

 

A few pin holes to be done

Made headlight brackets and the work perfect :-) the coca-cola tops push the whole headlight up and keep it tight


Headlight all in and lens all cut to shape

All sanded ready for more primer

Re-primered