Got the drivers side headlight all wired up




Passenger side spagetti junction nearly there another day or so on this side

 

cool to see rx7 fans from everywhere

 

Made the passenger side headlight brackets

Headlight in

Headlight in just a few bits to do


Headlight lens nearly in

HID's all working

 

Door cut out

A bit of weight added to keep the lens in position

Door cut out just have to finish the sills

Passenger side headlight in

 

what the heck... serious stuff

 

Coming along nicely!

 

Spent a bit on the rear here it is in primer this was a in a bad way as the fiberglass was very poorly laid up



A few pin hole can only be seen when primer is painted on re-fillered and left to dry

 

Got the fake disk cut out i done this all by hand no machines used here

The drill/groove disk look im going for

All primed ready for painting

 

Rear disk

Fitted and painted


Polished

Front passenger disk fitted

Drivers side disk fitted

Passenger rear caliper trial fitted

 

Got the air scoops back


The disk painted and caliper on

 

this is super sweet mn good work!

 

Loving this build, its looks awesome

 

Closing panel for the rear lights all hand made

Trial fitted before paint

Carbon air vents

 

Sorry i havent been on here much just busy

Here is the passenger exterior door handle being fitted

Flat


Got the door mechanism working bit of modification to this


This is the angle i have it set at

Got these from a scrap yard there from a peugeot 106 there the interior door handles

This is where the door handle is going

 

holy crap thats a **** load of work. good luck you have way more patience than me

 

Passenger interior handle working

Door closed

Wasnt happy with the lambo handles so i got these

Lambo moved back

Wing mirror on and door getting bonded

 

Fiberglassed the inner and outer skin on the passenger side door

Fiberglassed the hole where the gas ram goes

Door lock and catch working

Drivers door in place



Drivers door opened

Alot of fitting work and gaps going on its slow work but will pay off

 

Got these for the doors

Getting all the gaps done

Still a good bit of work left to do

 

Such a sick build!

 

Got the rear booth back today




my new drag racer




Wire tuck all done and car stripped of front panels


Engine bay all sanded back and all the holes filled in ready for sanding

 

Front wings all primed


Engine bay nearly finished only one more day on it and it will be ready for priming


First coat of primer

Booth off and wiper motor removed and fiberglassing the hole left

Most of this will be cut away to save weight

Starting to remove all the sound deading



Booth cut out for weight savings

All masked up ready for its journey tomorrow stay tuned :winks:

Centre section all sorted ready for its journey

Passenger side section all cut out

 

All the sound deading taken out

 

Much respect on all the effort

 

Oh my god that's insane fabricating skills

 

Driver rear all cut out

All the sound deading took out just need to hoover it

More sound deading up the front

All removed

Getting there

Mr & Mrs