coopdog123

y do i have to post 3 times in the new member area? seems odd. but, since im posting, ill say that i dont have a mazda, i dont even want one particularly, im just looking for a project car and found an rx7 and i just want info on it.

only one more post to go

Rx-7Doctor

iTrader: (13)

We have our reasons for this.

You sure are full of contradictions?

I don't have a Mazda yet you put that you have a 85 RX-7 in your profile. I don't even want one then why are you inquiring about one?

Scorpio Antares

Call the WHAM-bulance!!!!!

coopdog123

i said i dont particularly want one, and that im looking for a project car. i found an rx7 on craigs list, and figured that if im going twist the frame with some real muscle, it might as well be with an inport. the car is only 100 bucks, cuz even though it has a running engine, its a pos. now, moderator, why didnt my other two posts get through? was the subject matter not up to snuff? didnt introduce myself correctly, or at all?

FCturboIIfan

only 100 running thats cool

coopdog123

ya, thats what i thought. and since i already have a 351w sitting in my guarage, i figured a decent track car is only a couple months away. the poor little mazda is gonna need some subframes and torque arms if i plan on keeping it from turning into a corkscrew. the little ford 2.3 liter thats in it now is on its last leg, and in its place there shall be some screaming detroit muscle. a little degrading for the poor 351, but it will get over it.

Sgt Fox

iTrader: (3)

You may want to change your attitude if you want other members to provide you with information.

Your posts are in a Moderation Queue. Once they have been approved then they will be shown. As for this thread:
It will not be approved as it does not comply to the rules at the top of this forum. Its nothing more than post whoring.

Have fun on these boards and play safe.

coopdog123

are you saying that your members are stuck up? they wont give a fellow car enthusiest some info? are they afraid that their rotary motor wont be able to keep up with my project car? anyways, i found info elseware and will no longer be needing their advice. thanks for all your help and understanding.

ncfc3s

iTrader: (1)

At Rx7club.com, we welcome everyone....but im with Mr. Fox on this one. Change your attitude. swap, I doubt you can do . I mean, inport and 2.3 for engine? Just get a nice fox body and drop your precious little 351 in it, and watch a 1.3 smoke it...then you would realize that the 351 is degrading to the rx7 Good luck with your project though.

raffer

iTrader: (4)

i finally made a post ,what a pain in the *** !

ncfc3s

iTrader: (1)

Welcome, raffer.