im finding this rediculous
y do i have to post 3 times in the new member area? seems odd. but, since im posting, ill say that i dont have a mazda, i dont even want one particularly, im just looking for a project car and found an rx7 and i just want info on it.
only one more post to go:wallbash: |
We have our reasons for this.
You sure are full of contradictions? I don't have a Mazda yet you put that you have a 85 RX-7 in your profile. I don't even want one then why are you inquiring about one?:)
Originally Posted by coopdog123
(Post 8943516)
y do i have to post 3 times in the new member area? seems odd. but, since im posting, ill say that i dont have a mazda, i dont even want one particularly, im just looking for a project car and found an rx7 and i just want info on it.
only one more post to go:wallbash: |
Call the WHAM-bulance!!!!!
|
i said i dont particularly want one, and that im looking for a project car. i found an rx7 on craigs list, and figured that if im going twist the frame with some real muscle, it might as well be with an inport. the car is only 100 bucks, cuz even though it has a running engine, its a pos. now, moderator, why didnt my other two posts get through? was the subject matter not up to snuff? didnt introduce myself correctly, or at all?
|
only 100 running thats cool
|
ya, thats what i thought. and since i already have a 351w sitting in my guarage, i figured a decent track car is only a couple months away. the poor little mazda is gonna need some subframes and torque arms if i plan on keeping it from turning into a corkscrew. the little ford 2.3 liter thats in it now is on its last leg, and in its place there shall be some screaming detroit muscle. a little degrading for the poor 351, but it will get over it.
|
Originally Posted by coopdog123
(Post 8945817)
now, moderator, why didnt my other two posts get through? was the subject matter not up to snuff? didnt introduce myself correctly, or at all?
Your posts are in a Moderation Queue. Once they have been approved then they will be shown. As for this thread:
Originally Posted by coopdog123
(Post 8943523)
woo hoo! last post! see you guys in the real threads!
Have fun on these boards and play safe. |
are you saying that your members are stuck up? they wont give a fellow car enthusiest some info? are they afraid that their rotary motor wont be able to keep up with my project car? anyways, i found info elseware and will no longer be needing their advice. thanks for all your help and understanding.
|
At Rx7club.com, we welcome everyone....but im with Mr. Fox on this one. Change your attitude. swap, I doubt you can do . I mean, inport and 2.3 for engine? Just get a nice fox body and drop your precious little 351 in it, and watch a 1.3 smoke it...then you would realize that the 351 is degrading to the rx7 Good luck with your project though.
|
newbie
i finally made a post ,what a pain in the ass !
|
Welcome, raffer.
|
All times are GMT -5. The time now is 05:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands