Extreme tyre FD RX7 MB
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jul 2017
Location: NJ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Extreme tyre FD RX7 MB
Hey rx7club!
I want to introduce myself, my names kamil and I’m a grass roots driver that’s
competing in the EU for the past 2 years. Over there I drive a 2000 Renault Clio sport phase1. Caged 6 point harness,, bilstein coilovers, all new bushings, Brembo max rotors ferredo ds2500, intake exhaust, gripper lsd and short gearing. I’ve been driving on Extreme vr2 tires there and decided to start a new venture in the USA which is bringing these tires state side!
Im from NJ and just opened up a shop there in Hillsborough, Nj. We’re retailing the extreme vr1 and vr2 tires and decided we need to have some track presence. We brought over some fist 126p rally cars and here we got a 1993 rx7
from Louisiana. Car is a montego blue with 89k and massive amounts of bolt ons. We’re working on the car to make it more track focused and will be showing up at autox and hpde’s in the tri state.
Body/exterior:
- Shine Auto Feed Rep Hood With Aerocatch locking hood pins (Carbon Fiber, but painted to match)
- Shine Auto Side diffusers
- Shine Auto Re rear diffuser
- Shine Auto Low pro rear spoiler
- Sake Bomb garage HID retrofits
- 99 spec front lip
- 99 oem bumper (shaved plate)
- no brand carbon fiber canards
-HotWaterLabs exhaust shield
-99 spec tail lights
-Ganador mirrors
-Tow
-Smoked turn signals
-Rear Mud Flaps
-Red Efini Badges and Red Rx7 emblem
Wheels:
- enkei rpf1 18x8.5 & 18x9.5 with extreme vr2 255/35 & 265/35 (race wheels)
- 5zigen Fn01rc wheels 17x9 & 17x10 (daily wheels)
Interior:
- sparco 330mm wheel
-nrg hub
- Car was originally Auto. (has been 5 speed swapped)
- Full black interior swap (bins are the only thing painted)
-pioneer headunit
-Alpine front and rear speakers (Bose delete)
-latheworks shift ****
-Uber Rare Mazdaspeed titanium ebrake
-4 pod gauge (solid piece that fits where the center speaker used to go)
-Defi old school gauges (Coolant, Oil Pressure, boost)
-Rear wiper delete with OEM Integra delete plug
-Sakebomb Garage Fire extinguisher seat mount with quick disconnect
-BubbleTech Passenger foot rest
-Justin Rx7 floor mats
-Sakebombgarage Aluminum passenger door handle
-OEM Center Armrest compartment
-OEM Aluminum Scuff plates
Engine 1.0 (done by previous owner)
- Apexi Power FC tuned by Rotary Performance
- Apexi Power FC commander holder
-Rotary Performance fuel pump
-Innovative LCD II Wideband gauge
-Greddy SMIC
-Greddy Elbow
-IRP SS oil filler neck
- 99 spec y pipe
-Dual Manual Boost controllers
-HKS Twin Power Ignition
-Bubble tech cooling panel
-Aluminium rad
-optima redtop
- HKS Turbo Timer
-HKS Hi Power Exhaust
-HKS downpipe
-Bonez hi flow cat
-B&M short throw shifter
-Polished UIM with reflective gold tape on the underside.
-Polished Throttle body
-M2 Cold Air intake box (with new k&n filters)
-Tial Q BOV
-Pettit Racing AST
-IRP Alternator upgrade
-Pineapple Racing Idler Pulley
Engine 2.0 being rebuilt off season 2017
- street port by IRP
- bnr stage3 sequential turbos
- electric water pump
-sakebomb ignition upgrade
- 2000cc secondary injectors
-Koyo radiator
-oddessy battery relocated to bins
-aluminum primary intake pipe
- setrab twin oil coolers in stock locations
Brakes 1.0:
Drilled slotted rotors (don’t know brand)
Brakes 2.0 (for season 2018)
TBA
Suspension/handling
- HPP 2in1 Diff Cradle/Brace made by TOMSN16
- autoexe under braces
- autoexe strut tower bars
- rigid rear diff bushings
- super pro front and rear arm bushings (all)
- pillow ball lateral & toe arms
- OEM pillowballs replaced in all arms
- ohlins dfv coilovers
- feed fender braces
- beatrush aluminum under tray with sides
- racingbeat rear swaybar
- pillow ball endlinks F+R
I want to introduce myself, my names kamil and I’m a grass roots driver that’s
competing in the EU for the past 2 years. Over there I drive a 2000 Renault Clio sport phase1. Caged 6 point harness,, bilstein coilovers, all new bushings, Brembo max rotors ferredo ds2500, intake exhaust, gripper lsd and short gearing. I’ve been driving on Extreme vr2 tires there and decided to start a new venture in the USA which is bringing these tires state side!
Im from NJ and just opened up a shop there in Hillsborough, Nj. We’re retailing the extreme vr1 and vr2 tires and decided we need to have some track presence. We brought over some fist 126p rally cars and here we got a 1993 rx7
from Louisiana. Car is a montego blue with 89k and massive amounts of bolt ons. We’re working on the car to make it more track focused and will be showing up at autox and hpde’s in the tri state.
Body/exterior:
- Shine Auto Feed Rep Hood With Aerocatch locking hood pins (Carbon Fiber, but painted to match)
- Shine Auto Side diffusers
- Shine Auto Re rear diffuser
- Shine Auto Low pro rear spoiler
- Sake Bomb garage HID retrofits
- 99 spec front lip
- 99 oem bumper (shaved plate)
- no brand carbon fiber canards
-HotWaterLabs exhaust shield
-99 spec tail lights
-Ganador mirrors
-Tow
-Smoked turn signals
-Rear Mud Flaps
-Red Efini Badges and Red Rx7 emblem
Wheels:
- enkei rpf1 18x8.5 & 18x9.5 with extreme vr2 255/35 & 265/35 (race wheels)
- 5zigen Fn01rc wheels 17x9 & 17x10 (daily wheels)
Interior:
- sparco 330mm wheel
-nrg hub
- Car was originally Auto. (has been 5 speed swapped)
- Full black interior swap (bins are the only thing painted)
-pioneer headunit
-Alpine front and rear speakers (Bose delete)
-latheworks shift ****
-Uber Rare Mazdaspeed titanium ebrake
-4 pod gauge (solid piece that fits where the center speaker used to go)
-Defi old school gauges (Coolant, Oil Pressure, boost)
-Rear wiper delete with OEM Integra delete plug
-Sakebomb Garage Fire extinguisher seat mount with quick disconnect
-BubbleTech Passenger foot rest
-Justin Rx7 floor mats
-Sakebombgarage Aluminum passenger door handle
-OEM Center Armrest compartment
-OEM Aluminum Scuff plates
Engine 1.0 (done by previous owner)
- Apexi Power FC tuned by Rotary Performance
- Apexi Power FC commander holder
-Rotary Performance fuel pump
-Innovative LCD II Wideband gauge
-Greddy SMIC
-Greddy Elbow
-IRP SS oil filler neck
- 99 spec y pipe
-Dual Manual Boost controllers
-HKS Twin Power Ignition
-Bubble tech cooling panel
-Aluminium rad
-optima redtop
- HKS Turbo Timer
-HKS Hi Power Exhaust
-HKS downpipe
-Bonez hi flow cat
-B&M short throw shifter
-Polished UIM with reflective gold tape on the underside.
-Polished Throttle body
-M2 Cold Air intake box (with new k&n filters)
-Tial Q BOV
-Pettit Racing AST
-IRP Alternator upgrade
-Pineapple Racing Idler Pulley
Engine 2.0 being rebuilt off season 2017
- street port by IRP
- bnr stage3 sequential turbos
- electric water pump
-sakebomb ignition upgrade
- 2000cc secondary injectors
-Koyo radiator
-oddessy battery relocated to bins
-aluminum primary intake pipe
- setrab twin oil coolers in stock locations
Brakes 1.0:
Drilled slotted rotors (don’t know brand)
Brakes 2.0 (for season 2018)
TBA
Suspension/handling
- HPP 2in1 Diff Cradle/Brace made by TOMSN16
- autoexe under braces
- autoexe strut tower bars
- rigid rear diff bushings
- super pro front and rear arm bushings (all)
- pillow ball lateral & toe arms
- OEM pillowballs replaced in all arms
- ohlins dfv coilovers
- feed fender braces
- beatrush aluminum under tray with sides
- racingbeat rear swaybar
- pillow ball endlinks F+R
Last edited by Kamil Anthony T; 10-19-17 at 05:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TheFriZ
Introduce yourself
15
10-21-14 06:13 PM